Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Kaohsiung
Control electronics, servo drive and mechanical repair for Okuma machine tools across Kaohsiung — the heavy-industry, steel and shipbuilding port of southern Taiwan.
OSP Control Specialists
Heavy-Duty & Coastal Aware
60Hz — 110V/220V Supply
Photo coming soon
Okuma Repair Support for Kaohsiung Manufacturers
Kaohsiung is Taiwan’s great southern port and heavy-industry powerhouse — home to major steelmaking, petrochemical and shipbuilding industries, marine engineering and the port and logistics machinery that grow up around one of the world’s busiest container harbours.
For Kaohsiung, ship-in is the practical model: send us the specific faulty component and we diagnose and repair it at board level on our German bench, then return it through Taoyuan’s air-cargo links. On-site visits are possible, but at Taiwan’s distance ship-in is almost always the better route.
Okuma’s OSP control is all we do, and has been for close to twenty years — a genuinely different system from the FANUC and Mitsubishi controls most Taiwanese repairers are set up for, and the reason the south’s heavy-industry shops reach out to us.
0
Years repairing Okuma electronics
0
Matches Taiwan’s 60Hz standard
0
Okuma model series supported
Kaohsiung
Heavy-industry & shipbuilding port
Heavy Industry and Shipbuilding on the Southern Coast
Kaohsiung’s machining leans heavy — steel, petrochemical, shipbuilding and port machinery run under sustained, high load — so drive strain and spindle-bearing wear are common and expected on a fault report here, more so than the precision-accuracy faults of a lighter shop.
As a hot, humid southern port, Kaohsiung sees salt-laden sea air that drives gradual connector and contact corrosion, and typhoon season adds both moisture and power-surge stress — so coastal corrosion is one of the first things we check on an intermittent fault from a harbour-side machine.
The electrical point is the same across the island: Taiwan runs 110V/220V at 60Hz, aligned with the American and Japanese standard rather than Europe’s 50Hz, so we confirm exact voltage and frequency before any repaired component ships back.
Common Faults on Kaohsiung Okuma Machines
Servo & spindle drive faults
Heavy steel, petrochemical and shipbuilding work stresses drives hardest — overcurrent trips and feedback errors are common, and we bench-test the drive electronics directly rather than assuming a motor problem.
Spindle bearing wear
Sustained high-load cutting on big components wears spindle bearings faster; noise, vibration and finish loss point here rather than to the electronics.
Coastal salt-air & corrosion
Salt-laden southern sea air drives gradual connector and contact corrosion — a leading suspect on an intermittent fault from a harbour-side machine.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain common reasons an OSP control won’t boot or throws alarms.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Industries We Support Around Kaohsiung
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Steel & Metals
Machining for the south’s major steelmaking and metals operations.
Shipbuilding & Marine
Vessel, deck-machinery and marine-engineering components for the shipyards.
Petrochemical & Process
Machining and repair support for the region’s petrochemical and process plant.
Port & Logistics
Machining for the handling and logistics equipment of one of the world’s busiest ports.
Metal Fabrication
Structural and heavy fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across the south.
Okuma Machines & OSP Controls We Support
We’re not tied to one machine family: the full Okuma CNC range is supported from your Kaohsiung facility — lathes and turning centers, MULTUS mill-turn, vertical and horizontal machining centers, 5-axis and double-column machines, grinders and older legacy platforms. Start from the Okuma models directory or the list of components we repair.
OSP is where Okuma differs most from other builders — it’s their in-house control, so FANUC or Mitsubishi experience doesn’t transfer cleanly. We repair the whole OSP line, from OSP5000 and OSP700 through the P100–P300 generations to the current OSP-P500. A nameplate photo is enough for us to pin down the exact generation before anything ships.
Shipping a Repair From Kaohsiung to Our German Bench
For Kaohsiung, ship-in is the practical model: send us the specific faulty component and we diagnose and repair it at board level on our German bench, then send it back. On-site visits are possible, but at Taiwan’s distance ship-in is almost always the better route.
1
Describe the Fault
Machine model, OSP control generation, voltage, alarm codes and a description or photo of what’s happening.
2
We Confirm the Component
We identify exactly what needs to ship, and how to remove it safely, before anything is disconnected.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Flown Back
Verified under load at your machine’s voltage, then returned by international air-cargo through Taoyuan to your Kaohsiung facility, ready to reinstall.
We support Kaohsiung and the surrounding region — including the port and steelworks districts, the Linhai industrial park, the shipyards and the southern coast. And we do travel — for a fault that genuinely needs hands-on diagnosis we can arrange an on-site engineer visit anywhere in Taiwan; ship-in is simply the standard given the distance. Our emergency & express repair and retrofit & modernization services cover both paths in more detail.
Other Cities We Serve Across Taiwan
Kaohsiung is one of the locations we cover — our Okuma repair support reaches manufacturers across the whole island, from the semiconductor parks of the north to the machine-tool heartland of the centre and the heavy-industry ports of the south.
Taipei
The capital — the technology and precision base of the north.
Hsinchu
Taiwan’s semiconductor capital and science-park heartland.
Taichung
The island’s machine-tool and bicycle-manufacturing capital.
Changhua
Taiwan’s hardware, fastener and metalworking heartland.
Tainan
A southern semiconductor and green-energy hub.
All of Taiwan
Back to our full Taiwan coverage overview.
Explore More Resources
Our Kaohsiung support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Taiwan Coverage
Back to our full Okuma repair overview for Taiwan.
Frequently Asked Questions
Usually the drive. Hard, high-load duty stresses the drive electronics most, so we bench-test the drive directly under load rather than condemning the motor on assumption.
Over time, yes — salt-laden sea air corrodes connectors and contacts, a classic source of intermittent faults, so we check for it early on a harbour-side machine.
It’s exactly why we confirm your machine’s specification carefully. Taiwan runs 60Hz — not Germany’s 50Hz — and voltage is 110V/220V, so the exact figures matter here.
Yes — for a fault that genuinely needs hands-on diagnosis we can arrange an on-site visit; ship-in is simply the standard given Taiwan’s distance.
Your machine’s model, the OSP control generation, its voltage and any alarm codes shown, plus a short description of the fault.
Have an Okuma Machine Down in Kaohsiung?
Tell us the model, control generation, voltage and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
