Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Liberec
Control electronics, servo drive and mechanical repair for Okuma machine tools across Liberec — a glass, crystal and automotive-supply hub in North Bohemia, close to the German border.
OSP Control Specialists
Precision & Border-Region Aware
230V / 400V — European-Compatible
Photo coming soon
Okuma Repair Support for Liberec Manufacturers
Liberec sits in North Bohemia near the German border — a city with a world-famous Bohemian glass and crystal heritage, a strong automotive-supply and components base, and a machinery and precision-engineering sector with roots in the region’s textile and glass-machinery past.
Its northern-border location is a real advantage: Liberec is one of the closest parts of the country to our workshop, so an on-site engineer visit is especially convenient — though ship-in remains the quicker option for a single board or drive.
For close to twenty years we’ve focused only on Okuma’s OSP control — a different platform from the FANUC and Siemens systems most general repairers know, and the reason Liberec’s manufacturers reach out to us.
0
Years repairing Okuma electronics
0
Matches Liberec’s power standard
0
Okuma model series supported
North Bohemia
Glass, crystal & automotive-supply hub
Common Faults on Liberec Okuma Machines
Encoder & feedback drift
On precision glass-machinery and automotive-supply work, a failing encoder or scale causes gradual drift that’s easy to mistake for a drive fault — we check feedback accuracy directly.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components are the most common reasons an OSP control won’t boot or throws intermittent alarms.
Servo & spindle drive faults
Overcurrent trips and feedback errors present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
Cold-start & condensation faults
Cold, mountainous North-Bohemia winters cause cold-start and condensation faults in unheated bays — the typical pattern here.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Industries We Support Around Liberec
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Glass & Crystal
Machining and repair for the region’s glass, crystal and glass-machinery industry.
Automotive Supply
Component work for the region’s automotive-supplier base.
Machinery & Engineering
Sub-assembly and machinery work for the region’s engineering base.
Precision Engineering
Short-run and tight-tolerance work for the region’s precision shops.
Metal Fabrication
Structural and general fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across North Bohemia.
Bohemian Glass and Crystal
Liberec’s mix is distinctive — the precision of Bohemian glass and crystal production and its machinery, alongside a strong automotive-supply base — so the Okuma work here leans toward fine, repeatable tolerances, and feedback and positioning faults get particular attention.
Being right on the northern border, Liberec is unusually quick for us to reach on-site when a fault genuinely needs hands-on diagnosis.
The mountainous North-Bohemia climate brings cold winters, so cold-start and condensation on machines in unheated bays are a real environmental factor. Power is the European-standard 230V/400V at 50Hz, matching Germany.
Okuma Machines & OSP Controls We Support
We’re not tied to one machine family: the full Okuma CNC range is supported from your Liberec facility — lathes and turning centers, MULTUS mill-turn, vertical and horizontal machining centers, 5-axis and double-column machines, grinders and older legacy platforms. Start from the Okuma models directory or the list of components we repair.
OSP is where Okuma differs most from other builders — it’s their in-house control, so FANUC or Siemens experience doesn’t transfer cleanly. We repair the whole OSP line, from OSP5000 and OSP700 through the P100–P300 generations to the current OSP-P500. A nameplate photo is enough for us to pin down the exact generation before anything ships.
How We Support a Repair in Liberec
Liberec is one of the closest parts of the country to our workshop, so an on-site engineer visit is especially convenient — though ship-in remains the quicker option for a single board or drive.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or Ship-In
We agree the faster route — an engineer visit over the short direct route, or removing the specific faulty component to send in.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then shipped back or refitted on-site at your Liberec facility, ready to run.
We support Liberec and the wider North Bohemia region — including Jablonec nad Nisou, Turnov and the German-border area. The drive to most Czech industrial regions is short and straightforward — genuinely one of the more convenient countries we support outside Germany itself — so on-site visits are a practical option here, not a last resort. Our emergency & express repair and retrofit & modernization services cover both the on-site and ship-in paths in more detail.
Other Cities We Serve Across the Czech Republic
Liberec is one of the locations we cover — our Okuma repair support reaches manufacturers across the whole country, from Bohemia and the capital to Moravia and the Silesian industrial east.
Prague
The capital — aerospace, machinery and broad manufacturing.
Brno
A machine-tool and precision-instrument centre in Moravia.
Plzeň
A heavy-engineering, rail and brewing hub in West Bohemia.
Ostrava
The steel and heavy-industry heartland of Moravia-Silesia.
Mladá Boleslav
The home of Czech automotive manufacturing.
All of the Czech Republic
Back to our full Czech coverage overview.
Explore More Resources
Our Liberec support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Czech Coverage
Back to our full Okuma repair overview for the Czech Republic.
Frequently Asked Questions
Yes — it’s in North Bohemia near the German border and one of the closest parts of the country to our workshop, which makes an on-site visit especially convenient. Ship-in is still often quicker for a single board or drive.
Yes — that work needs fine, repeatable accuracy, so we pay particular attention to feedback and drive faults that erode tolerance before they stop a machine.
Just the specific faulty component in almost every case. We’ll confirm what to send and how to remove it safely first.
Yes — 230V/400V at 50Hz matches the German and European standard, so no adaptation is needed. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Liberec?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
