Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Perth
Control electronics, servo drive and mechanical repair for Okuma machine tools across Perth — Western Australia’s mining and oil-and-gas capital, where dust, heat and real distance define every repair.
OSP Control Specialists
Mining Dust, Heat & Distance Aware
230V / 415V — 50Hz Supply
Photo coming soon
Okuma Repair Support for Perth Workshops
Perth is the engine room of Australia’s resources economy — the base for the mining and minerals giants working the Pilbara and Goldfields, the oil-and-gas and LNG operators of the North West Shelf, and the heavy-fabrication and defence shops that support them, clustered around Kwinana, Welshpool and Henderson.
It’s also the most isolated capital city in the world, which makes ship-in repair the only sensible model: you remove the specific faulty component and send it to our German bench, and we repair and return it. We plan the international logistics realistically rather than pretend distance isn’t a factor.
For close to twenty years we’ve focused only on Okuma’s OSP control — not the FANUC and Siemens systems most general CNC electronics repairers know. That’s the specialisation Perth’s resources shops reach for when a local repairer can’t decode an OSP fault.
0
Years repairing Okuma electronics
0
Matches Perth’s power frequency
0
Okuma model series supported
West Coast
Mining & oil-and-gas capital
Dust, Heat and Real Distance
Two environmental stresses dominate in Western Australia. Dust is the first — fine, abrasive mineral dust from mining and arid-region work finds its way into cabinets and onto boards, clogging cooling and causing intermittent contact faults. Heat is the second: sustained high ambient temperatures push cooling systems and power electronics to their limits.
On top of that, the machining itself is often heavy-duty — large mining and resources components under high, continuous load — so drive strain and bearing wear stack on the environmental factors. We read a Perth fault report with all three in mind.
Distance is the third reality, and we build it into the plan. Power is the national 230V/415V 50Hz standard, sharing Europe’s frequency, which simplifies component matching — we confirm the exact specification first.
Common Faults We Diagnose on Perth Okuma Machines
Dust ingress & overheating
Abrasive mineral dust and sustained heat clog cooling and foul contacts, causing intermittent faults and thermal shutdowns — the leading environmental suspects in WA’s mining and arid-region work.
Servo & spindle drive faults
Heavy mining and resources duty stresses drives hardest — overcurrent trips and feedback errors are common, and we bench-test the drive electronics directly rather than assuming a motor problem.
Spindle bearing wear
Sustained high-load cutting on large components wears spindle bearings faster; noise, vibration and finish loss point here rather than to the electronics.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain common reasons an OSP control won’t boot or throws alarms.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Industries We Support Across Perth
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Mining & Minerals
Machining and repair for the mining-equipment and minerals-processing supply chain.
Oil, Gas & LNG
Precision, high-tolerance parts for North West Shelf oil, gas and LNG operations.
Heavy Fabrication
Structural and heavy fabrication combined with Okuma machining.
Defence & Shipbuilding
Component work for the Henderson defence and shipbuilding precinct.
Heavy-Duty Machining
Large-workpiece, high-load production typical of the resources supply chain.
General Machining & Job Shops
Contract shops keeping a remote resources economy running.
Okuma Machines & OSP Controls We Support
We’re not tied to one machine family: the full Okuma CNC range is supported from your Perth facility — lathes and turning centers, MULTUS mill-turn, vertical and horizontal machining centers, 5-axis and double-column machines, grinders and older legacy platforms. Start from the Okuma models directory or the list of components we repair.
OSP is where Okuma differs most from other builders — it’s their in-house control, so FANUC or Siemens experience doesn’t transfer cleanly. We repair the whole OSP line, from OSP5000 and OSP700 through the P100–P300 generations to the current OSP-P500. A nameplate photo is enough for us to pin down the exact generation before anything ships.
How a Repair Reaches You From the Other Side of the World
You’re on the far side of the world from our German workshop, and the service is built around that. Rather than routine field visits, support for Perth is ship-in: remove the specific faulty component, send it to us, and we bench-repair it and return it tested and ready to refit.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
We Confirm the Component
We identify exactly what needs to ship, and how to remove it safely, before anything is disconnected.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Returned
Verified under load, then returned by international courier to your Perth facility, ready to reinstall.
We support Perth and the wider region — including Kwinana, Welshpool, Henderson and the resources operations they supply across Western Australia. And we do travel — when a fault genuinely needs hands-on diagnosis at the machine, we can arrange an on-site engineer visit anywhere in Australia; ship-in is simply usually faster and far more economical from this distance. Our emergency & express repair and retrofit & modernization services cover both paths in more detail.
Other Cities We Serve Across Australia
Perth is one of the locations we cover — our Okuma repair support reaches workshops right across the country, from the west coast to the eastern seaboard.
Sydney
NSW capital with the broadest general and precision-manufacturing base.
Melbourne
Victoria’s advanced-manufacturing and defence heartland.
Brisbane
Queensland gateway for mining services, rail and resources engineering.
Adelaide
South Australia’s defence, shipbuilding and precision-engineering centre.
Newcastle
Hunter-region coal port and heavy-engineering hub.
Wollongong
Illawarra steelmaking and heavy-industry city.
Geelong
Victorian advanced-manufacturing and composite-materials centre.
All of Australia
Back to our full Australia coverage overview.
Explore More Resources
Our Perth support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Australia Coverage
Back to our full Okuma repair overview for Australia.
Frequently Asked Questions
Yes — ship-in works the same regardless of how remote you are. Perth is the most isolated capital in the world, and we plan the international logistics around that up front.
Yes — fine, abrasive dust clogs cooling and fouls contacts, causing intermittent faults and thermal shutdowns. Combined with sustained heat, it’s the leading environmental factor we check for on a WA machine.
Often the drive. Heavy, high-load duty stresses the drive electronics most, so we bench-test the drive directly under load rather than condemning the motor on assumption.
Largely, yes — 230V/415V at 50Hz shares Europe’s frequency. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Got an Okuma Machine Down in Perth?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
