Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Craiova
Control electronics, servo drive and mechanical repair for Okuma machine tools across Craiova — a southern Romanian base for automotive, rail and heavy industry in the Oltenia region.
OSP Control Specialists
Heavy-Duty & Continental Aware
230V / 400V — European-Compatible
Photo coming soon
Okuma Repair Support for Craiova Manufacturers
Craiova is the industrial heart of Oltenia in southern Romania, with a heavy-industry pedigree that runs deep — a major automotive plant, a long history of locomotive and heavy-electrical manufacturing, and aircraft production, all in and around the city.
As an EU location, Craiova can be served both ways: ship-in repair for a single faulty component, or an on-site engineer visit for a larger installation. Both are practical from our German workshop, and we’ll advise which suits the job.
For close to twenty years we’ve focused only on Okuma’s OSP control — not the FANUC and Siemens systems most general CNC electronics repairers know. That’s the specialisation Craiova’s heavy-industry shops reach for when a local repairer can’t decode an OSP fault.
0
Years repairing Okuma electronics
0
Matches Craiova’s power standard
0
Okuma model series supported
Oltenia
Automotive, rail & heavy-industry base
A Southern Heavy-Industry and Automotive Base
Craiova’s industry splits two ways, and so does our diagnosis. On one side, high-volume automotive production demands repeatable precision, where feedback accuracy is everything. On the other, heavy locomotive, electrical and aircraft work runs machines under sustained, high load, where drive strain and bearing wear dominate.
So a Craiova fault report gets read by first asking which side of that line a machine sits on — precision or heavy duty — because it points the diagnosis in very different directions.
Sitting on the southern plain, Craiova has a continental climate with hot summers and cold winters; the winter cold-start and condensation pattern is the main environmental factor, with no coastal salt. Power is the European-standard 230V/400V at 50Hz.
Common Faults on Craiova-Region Okuma Machines
Servo & spindle drive faults
Heavy rail, electrical and industrial work stresses drives hard — overcurrent trips and feedback errors are common, and we bench-test the drive electronics directly rather than assuming a motor problem.
Encoder & feedback drift
On high-volume automotive work, a failing encoder or scale causes gradual drift that erodes repeatable tolerance — we check feedback accuracy directly.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain common reasons an OSP control won’t boot or throws alarms.
Cold-start & condensation faults
Cold southern-plain winters cause cold-start and condensation faults in unheated bays — the typical inland pattern here.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Industries We Support in the Craiova Region
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Automotive Manufacturing
Machining for the region’s major automotive plant and its supplier base.
Rail & Rolling Stock
Components for Craiova’s locomotive and rail-manufacturing heritage.
Aerospace
Precision parts for the city’s aircraft-manufacturing industry.
Heavy Electrical & Machinery
Machining for the region’s heavy-electrical and industrial-machinery builders.
Metal Fabrication
Structural and heavy fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across Oltenia.
Okuma Machines & OSP Controls We Support
We’re not tied to one machine family: the full Okuma CNC range is supported from your Craiova facility — lathes and turning centers, MULTUS mill-turn, vertical and horizontal machining centers, 5-axis and double-column machines, grinders and older legacy platforms. Start from the Okuma models directory or the list of components we repair.
OSP is where Okuma differs most from other builders — it’s their in-house control, so FANUC or Siemens experience doesn’t transfer cleanly. We repair the whole OSP line, from OSP5000 and OSP700 through the P100–P300 generations to the current OSP-P500. A nameplate photo is enough for us to pin down the exact generation before anything ships.
How We Support a Craiova Repair — Road or Ship-In
Both paths are practical for Craiova: ship-in for a single faulty board or drive, or an on-site visit for a bigger installation. The road haul from Germany is longer than for our closest neighbours, but well within reach for either option.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or Ship-In
We agree the right route — an engineer visit for a larger installation, or removing the faulty component to send in.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then shipped back or refitted on-site at your Craiova facility, ready to run.
We support Craiova and the wider Oltenia region — including Slatina, Târgu Jiu and the surrounding industrial area. Our emergency & express repair and retrofit & modernization services cover both the on-site and ship-in paths in more detail.
Other Cities We Serve Across Romania
Craiova is one of the locations we cover — our Okuma repair support reaches manufacturers on both sides of the Carpathians, from the western Banat to Moldavia in the east.
Bucharest
The capital and the country’s broadest manufacturing, aerospace and technology base.
Brașov
Transylvanian hub for vehicles, aerospace, machine tools and bearings.
Cluj-Napoca
Transylvania’s technology, electronics and precision-engineering centre.
Iași
Eastern Moldavia’s technology, pharmaceutical and industry centre.
Pitești
Romania’s automotive manufacturing capital, home of the Dacia plant.
Sibiu
Transylvanian automotive-components and precision-manufacturing cluster.
Timișoara
Western Banat manufacturing and automotive gateway, closest to Central Europe.
All of Romania
Back to our full Romania coverage overview.
Explore More Resources
Our Craiova support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Romania Coverage
Back to our full Okuma repair overview for Romania.
Frequently Asked Questions
It depends which side of Craiova’s industry your machine serves. We ask that early — high-volume automotive work points to feedback and accuracy faults, while heavy rail and electrical work points to drive and bearing wear.
Yes — as an EU location we can arrange an on-site visit for a larger installation, or handle a single component as ship-in, whichever fits the job.
Just the specific faulty component in almost every case. We’ll confirm what to send and how to remove it safely first.
Yes — 230V/400V at 50Hz matches the German and European standard, so no adaptation is needed. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Craiova?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
