Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma MILLAC VH Series Repair & Support
Diagnostics and repair for Okuma’s large-workpiece 5-axis machining centers — built around a swivel spindle head rather than a tilting trunnion table, with a standard 2-pallet automatic changer.
Photo coming soon
What Is the Okuma MILLAC VH Series?
Where the GENOS M-5AX Series and MU-V Series both achieve 5-axis capability with a trunnion table that tilts the workpiece, the MILLAC VH Series takes a fundamentally different mechanical approach built specifically for large work pieces: a swivel spindle head that moves around the part instead. Rather than tilting a heavy casting or forging on a rotary table — which gets progressively harder and less accurate as parts get bigger and heavier — the MILLAC VH keeps the workpiece fixed on a large, rigid table and swings the spindle itself, with 0.001° indexing accuracy on inclined-surface machining. That single design decision is why this line exists as a separate product rather than simply a bigger version of a trunnion-table machine.
The structural approach matches the mechanical concept: a box-type bed with a rectangular, wide sliding surface provides the rigidity this design needs, while large ball screws with pre-tension and highly rigid supports keep accuracy stable even under the heavier cutting loads that come with large-part machining. One-chuck, multi-sided machining eliminates the setup errors that come from re-fixturing a large part between operations — a genuinely bigger productivity concern on this platform than on a smaller, lighter-part 5-axis machine.
A rotary-type 2-pallet automatic changer (2APC) comes as standard on the MILLAC VH Series, not as an option — recognizing that a machine built for large, process-intensive parts benefits from minimizing the time a machine sits idle during load/unload, even more so than a smaller 5-axis machine might. Okuma specifically positions this line for aerospace and other industries requiring process-intensive machining of large components.
MILLAC VH Series Models & Specifications
Both current models share the swivel-spindle architecture, scaled to two different table and part sizes.
MILLAC 800VH
- Table size: 800 x 800 mm
- Spindle speed: 10,000 min⁻¹ standard
- Axis travel: X 1,020 / Y 1,020 / Z 1,020 mm
- Motor: 22/18.5 kW
MILLAC 1000VH
- Table size: 1,000 x 1,000 mm
- Spindle speed: 6,000 min⁻¹ standard (opt. 10,000)
- Axis travel: X 1,850 / Y 1,300 / Z 1,000 mm
- Motor: 22/18.5 kW
Shared Architecture
- Swivel spindle, 0.001° indexing
- Box-type bed, wide rectangular slideway
- Large pre-tensioned ball screws
- Standard rotary-type 2APC
Tooling & Speed
- Tools: 80 standard (opt. 120/180/240)
- Rapid traverse (X/Y/Z): 945/945/473 ipm
- Rapid traverse (B-C): 1,440 min⁻¹
- Spindle power: 30/25 hp
Because the MILLAC 800VH runs 10,000 min⁻¹ as standard while the MILLAC 1000VH runs 6,000 min⁻¹ standard (with 10,000 min⁻¹ optional), confirming the exact spindle configuration fitted matters before ordering spindle-related parts on a 1000VH specifically.
Which OSP Control Does the MILLAC VH Series Use?
Current MILLAC VH Series machines run Okuma’s OSP-P500 control, coordinating the swivel spindle, linear axes and the standard 2APC through a single system. Because the swivel spindle’s 0.001° indexing accuracy is central to this platform’s inclined-surface machining claims, control-level faults affecting that indexing can present as surface-finish or accuracy problems rather than an obvious alarm.
Given the spindle-speed difference between the two models, confirming the exact model and spindle configuration matters before ordering any replacement control or drive boards.
Common MILLAC VH Series Faults We Repair
The MILLAC VH Series’ swivel-spindle design and large-part focus create a fault profile distinct from Okuma’s trunnion-table 5-axis lines.
Swivel spindle head faults
Because the entire platform’s inclined-surface machining depends on the swivel spindle holding 0.001° indexing accuracy, drift or vibration here shows up directly as surface-finish problems on angled cuts specifically, while flat-face milling on the same machine remains unaffected. We isolate the swivel mechanism as its own diagnostic category rather than treating it as a generic spindle issue.
2APC faults (standard feature)
Pallet-change timeouts or clamping-confirmation alarms are almost always mechanical or sensor issues in the changer itself. Given how central this changer is to keeping a large-part machine productive, we treat 2APC diagnosis as a priority.
Large pre-tensioned ball screw faults
On axes built with large, pre-tensioned ball screws to handle heavy cutting loads on large parts, positioning drift usually points to a loss of preload or drive-tuning issue rather than a general mechanical wear pattern typical of smaller machines.
ATC faults (80-240 tool magazine)
Tool-change faults on the larger-capacity magazine options are almost always mechanical or sensor issues in the ATC itself rather than a control fault.
Display and operator panel faults
Standard OSP-P500 display and panel faults follow the same repair pattern as other Okuma machining centers.
Given the swivel spindle’s central role in this platform’s accuracy claims, we isolate whether a fault is angled-cut-specific or general before recommending any repair. See our fault analysis and testing & diagnostics services for more on our approach.
Components We Repair on the MILLAC VH Series
Given the MILLAC VH Series’ swivel-spindle, large-workpiece design, these are the parts we’re asked to repair most often:
Spindles
Swivel spindle drive and 0.001° indexing mechanism repair.
Control Boards
OSP-P500 repair, including swivel-spindle indexing logic.
Servo & Spindle Drives
Drive electronics for the swivel head and linear axes.
Large Ball Screws
Pre-tensioned ball screw and preload repair for heavy loads.
ATC & 2APC
80-240 tool magazine and standard 2-pallet changer repair.
Operator Panels & Displays
Display and panel repair for OSP-P500 control units.
MILLAC VH Series Repair Services
The following services apply directly to MILLAC VH Series machines, whatever the fault:
CNC Control Repair
Board-level repair for OSP-P500 control units.
Drive Units Repair
Component-level repair of swivel-spindle and axis drives.
Testing & Diagnostics
Angled-cut vs. general fault isolation before repair begins.
Spindle Repair & Maintenance
Service for the swivel spindle across both current models.
Emergency & Express Repair
Priority turnaround with loaner units to minimize downtime.
Retrofit & Modernization
Upgrade path for older MILLAC VH machines on legacy controls.
Industries That Rely on the MILLAC VH Series
Its large-workpiece, swivel-spindle design makes the MILLAC VH Series well suited to:
Where We Support MILLAC VH Series Machines
CNC Elektronik is based in Germany, where aerospace and heavy-industry manufacturers rely on the MILLAC VH Series for large, process-intensive components.
We’ve also supported MILLAC VH Series repair work in Poland and Austria, where aerospace and energy-sector suppliers use this platform for large structural and casting work, as well as in Brazil, where large-component aerospace manufacturing is adopting similar swivel-spindle 5-axis capability. The process is the same regardless of distance: confirm the exact model and spindle configuration, isolate whether a fault is angled-cut-specific or general, and verify the machine under real cutting load before it returns to production. Given the value of the large components this platform typically machines, we prioritize getting the diagnosis right the first time over quick guesswork.
See our Countries We Serve page for our full regional coverage across Europe, the Americas, and parts of Asia and the Middle East.
Explore More Resources
The MILLAC VH Series is one part of a much wider Okuma ecosystem. Here’s where to go next:
All Okuma Models
Browse every Okuma machine series and model we repair.
OSP Controls
Every OSP control generation we diagnose and repair.
Automation & Robotics
FMS and pallet-pool integration options for large-part production.
Components & Parts
Every part type we repair, across the full Okuma range.
Countries We Serve
Where our repair and support coverage extends to.
Spare Parts
New and used Okuma electronics spare parts, tested before sale.
Frequently Asked Questions
Tilting a large, heavy workpiece on a rotary table gets progressively harder and less accurate as parts get bigger. The MILLAC VH instead keeps the part fixed and swings the spindle around it, which is better suited to large aerospace and heavy-industry components.
The 800VH has an 800 x 800mm table with a 10,000 min⁻¹ standard spindle. The 1000VH has a larger 1,000 x 1,000mm table with a 6,000 min⁻¹ standard spindle (10,000 min⁻¹ optional) and longer axis travel.
Both the MU-V Series and GENOS M-5AX Series use a trunnion table that tilts the workpiece. The MILLAC VH uses a swivel spindle head instead, purpose-built for larger, heavier parts.
Yes. Given how central this changer is to keeping a large-part machine productive, we treat 2APC diagnosis and repair as a standard part of what we support on this line.
In most cases, yes. Given the scale and cost of this platform, component-level repair of a control board, spindle drive or ATC component is typically a small fraction of the cost of a replacement.
Have a MILLAC VH Series Issue?
Send us your model number, control type and a description of the fault — we’ll get back to you with a practical assessment.
