Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Bordeaux
Control electronics, servo drive and mechanical repair for Okuma CNC machines across Bordeaux — an aerospace, defence and laser-technology centre on the Atlantic southwest.
OSP Control Specialists
Aerospace & Coastal Aware
230V / 400V — European-Compatible
Photo coming soon
Okuma Repair Support for Bordeaux Manufacturers
Bordeaux anchors a growing aerospace and defence industry in the southwest — aeronautics, defence systems and a notable laser and high-energy-physics sector — alongside the general engineering and marine work of an Atlantic port region.
Bordeaux sits in the far southwest, well away from our German workshop — still very much within reach, but a trip we plan deliberately. So ship-in is usually the better route for a single component: send us the faulty board or drive and we bench-repair and return it; an on-site visit is arranged for a larger job.
Okuma’s OSP control is all we do, and has been for close to twenty years — a genuinely different system from the FANUC and Siemens controls most French repairers are set up for, and the reason customers reach past their local service company to us.
0
Years repairing Okuma electronics
0
Matches Bordeaux’s power standard
0
Okuma model series supported
Nouvelle-Aquitaine
Aerospace, defence & laser centre
Aerospace and Defence on the Atlantic Southwest
Bordeaux’s aerospace, defence and laser work is precision-critical, and that shapes the diagnosis: on these components feedback accuracy is everything, so a drifting encoder or a marginal drive matters as much as an outright failure — we look for the drift, not just the dead part.
As an Atlantic port region, Bordeaux also sees humid, salt-tinged coastal air that can drive gradual connector and contact corrosion, which we check for on an intermittent fault — unlike the drier inland cities.
France runs a notably stable 230V/400V 50Hz grid, the same standard as Germany, so a repaired component returns without adaptation. We confirm the exact specification first.
Industries We Support Around Bordeaux
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Aerospace & Defence
Precision parts for the southwest’s aeronautics and defence-systems industry.
Laser & High-Tech
Tight-tolerance component work for the region’s laser and high-energy-physics sector.
Machinery & Engineering
Sub-assembly and machinery work for the region’s engineering base.
Marine & Port
Component work for the Atlantic port region’s marine and handling equipment.
Metal Fabrication
Structural and general fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across Nouvelle-Aquitaine.
Common Faults on Bordeaux Okuma Machines
Encoder & feedback drift
On aerospace, defence and laser work, a failing encoder or scale causes gradual drift that ruins tolerance before it stops the machine — we check feedback accuracy directly rather than assuming a drive fault.
Coastal humidity & corrosion
Humid, salt-tinged Atlantic air drives gradual connector and contact corrosion — a factor we check for on an intermittent fault, unlike the drier inland cities.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain common reasons an OSP control won’t boot or throws alarms.
Servo & spindle drive faults
Overcurrent trips and feedback errors present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Okuma Machines & OSP Controls We Support
Whatever sits on your Bordeaux shop floor, we cover the full Okuma catalogue — turning centers, MULTUS mill-turn platforms, vertical and horizontal machining centers, 5-axis, double-column machines and grinders, right back to legacy models. Browse the complete Okuma models directory, or jump straight to every component we repair for detail on a specific board, drive or assembly.
On the control side, OSP is Okuma’s own platform — not a re-badged FANUC or Siemens system — with its own diagnostics and board architecture. We cover every OSP generation: the floppy-era OSP5000, the OSP-P100 through P300 controls on most machines in service today, and the current OSP-P500. Send a photo of the control-cabinet nameplate and we’ll confirm the generation before anything ships.
How We Support a Repair in Bordeaux
Bordeaux sits well away from our German workshop — still very much within reach, but a trip we plan deliberately rather than treat as a same-day option. So ship-in is usually the better route for a single component, while an on-site visit is arranged for a larger job.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or Ship-In
We agree the faster route for your location — an engineer visit, or removing the specific faulty component to send in.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then shipped back or refitted on-site at your Bordeaux facility, ready to run.
We support Bordeaux and the wider Nouvelle-Aquitaine region — including Mérignac’s aerospace sites, Pessac and the surrounding southwest. Support is geography-dependent — an eastern facility might see us on-site quickly, while a southwestern one is usually better served by ship-in — and we’re honest about which suits your location. Our emergency & express repair and retrofit & modernization services cover both paths in more detail.
Other Cities We Serve Across France
Bordeaux is one of the locations we cover — our Okuma repair support reaches manufacturers across the whole country, from the German-border east to the Atlantic west and the aerospace southwest.
Paris
The Île-de-France base — aerospace, defence and broad manufacturing.
Toulouse
Europe’s aerospace and space capital.
Lyon
An industrial, chemical and machinery hub on the Rhône.
Grenoble
A microelectronics and high-tech centre in the Alps.
Strasbourg
Cross-border Alsace industry — the closest to Germany by road.
Mulhouse
An automotive and mechanical hub on the German border.
Nantes
An aerospace, shipbuilding and energy hub on the Atlantic.
All of France
Back to our full France coverage overview.
Explore More Resources
Our Bordeaux support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
France Coverage
Back to our full Okuma repair overview for France.
Frequently Asked Questions
Yes — that work needs the tightest, most repeatable accuracy, so we pay particular attention to feedback and drive faults that erode tolerance before they ever stop a machine.
Yes — you send only the specific faulty component, so courier turnaround is efficient even from the southwest. We plan any on-site visit deliberately, but for a single board or drive ship-in is usually the better route.
Over time, yes — humid, salt-tinged air corrodes connectors and contacts, a source of intermittent faults, so we check for it on a coastal machine.
Yes — France runs a stable 230V/400V 50Hz grid, the same standard as Germany, so no adaptation is needed. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Bordeaux?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
