Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Strasbourg
Control electronics, servo drive and mechanical repair for Okuma CNC machines across Strasbourg — a cross-border Alsace industrial centre, the closest part of France to our German workshop by road.
OSP Control Specialists
Cross-Border — On-Site Ready
230V / 400V — European-Compatible
Photo coming soon
Okuma Repair Support for Strasbourg Manufacturers
Strasbourg sits on the German border in Alsace, at the heart of a strongly cross-border industrial economy — automotive and machinery, pharmaceuticals, precision engineering and electronics, closely integrated with the manufacturing of the upper Rhine.
Its location is a real advantage for repair: Alsace is close enough to our German workshop for a convenient on-site visit, so a Strasbourg repair genuinely works both ways — an engineer on-site, or ship-in. For a single board or drive, ship-in is often still the quicker option.
Okuma’s OSP control has been our single focus for close to two decades — a different platform from the FANUC and Siemens systems most French repairers are built around, so a stubborn OSP fault is exactly what we’re set up for.
0
Years repairing Okuma electronics
0
Matches Strasbourg’s power standard
0
Okuma model series supported
Alsace
Cross-border industry — closest by road
Industries We Support Around Strasbourg
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Automotive & Machinery
Components for the region’s automotive and machinery manufacturers.
Pharmaceutical
Precision, clean-tolerance parts for the area’s pharmaceutical industry.
Precision Engineering
Short-run and tight-tolerance work for the region’s precision shops.
Electronics & Technology
Housings and precision parts for the upper-Rhine electronics sector.
Metal Fabrication
Structural and general fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across Alsace.
On the German Border — Closest by Road
Strasbourg’s cross-border position gives it a broad, well-integrated industrial base — automotive, machinery, pharmaceuticals and precision engineering — so we keep an open mind on failure modes and let each machine’s actual duty guide the diagnosis.
Being right on the border, Strasbourg is the closest part of France to our workshop, which makes on-site support unusually quick when a fault genuinely needs hands-on diagnosis.
France runs a notably stable 230V/400V 50Hz grid, the same standard as Germany, so a repaired component returns without adaptation. Alsace’s continental climate brings cold winters, so cold-start and condensation are a real environmental factor to check.
Okuma Machines & OSP Controls We Support
Whatever sits on your Strasbourg shop floor, we cover the full Okuma catalogue — turning centers, MULTUS mill-turn platforms, vertical and horizontal machining centers, 5-axis, double-column machines and grinders, right back to legacy models. Browse the complete Okuma models directory, or jump straight to every component we repair for detail on a specific board, drive or assembly.
On the control side, OSP is Okuma’s own platform — not a re-badged FANUC or Siemens system — with its own diagnostics and board architecture. We cover every OSP generation: the floppy-era OSP5000, the OSP-P100 through P300 controls on most machines in service today, and the current OSP-P500. Send a photo of the control-cabinet nameplate and we’ll confirm the generation before anything ships.
Common Faults on Strasbourg Okuma Machines
Encoder & feedback drift
On automotive and precision work, a failing encoder or scale causes gradual drift that’s easy to mistake for a drive fault — we check feedback accuracy directly.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components are the most common reasons an OSP control won’t boot or throws intermittent alarms.
Servo & spindle drive faults
Overcurrent trips and feedback errors present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
Cold-start & condensation faults
Cold Alsace winters cause cold-start and condensation faults in unheated bays — the typical continental pattern here.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
How We Support a Repair in Strasbourg
Eastern France — Alsace — is close enough to our German workshop for a convenient on-site visit, so a Strasbourg repair genuinely works both ways: an engineer on-site, or ship-in, where you send us the faulty component and we bench-repair and return it. For a single board or drive, ship-in is often still the quicker option.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or Ship-In
We agree the faster route for your location — an engineer visit, or removing the specific faulty component to send in.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then shipped back or refitted on-site at your Strasbourg facility, ready to run.
We support Strasbourg and the wider Alsace region — including Haguenau, Molsheim and the upper-Rhine cross-border belt. Support is geography-dependent — an eastern facility might see us on-site quickly, while a southwestern one is usually better served by ship-in — and we’re honest about which suits your location. Our emergency & express repair and retrofit & modernization services cover both paths in more detail.
Other Cities We Serve Across France
Strasbourg is one of the locations we cover — our Okuma repair support reaches manufacturers across the whole country, from the German-border east to the Atlantic west and the aerospace southwest.
Paris
The Île-de-France base — aerospace, defence and broad manufacturing.
Toulouse
Europe’s aerospace and space capital.
Lyon
An industrial, chemical and machinery hub on the Rhône.
Grenoble
A microelectronics and high-tech centre in the Alps.
Mulhouse
An automotive and mechanical hub on the German border.
Bordeaux
An aerospace, defence and laser centre on the Atlantic southwest.
Nantes
An aerospace, shipbuilding and energy hub on the Atlantic.
All of France
Back to our full France coverage overview.
Explore More Resources
Our Strasbourg support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
France Coverage
Back to our full Okuma repair overview for France.
Frequently Asked Questions
Yes — Alsace is right on the German border and the closest part of France to our workshop, which makes an on-site visit especially convenient. Ship-in is still often quicker for a single board or drive.
Just the specific faulty component in almost every case. We’ll confirm what to send and how to remove it safely first.
Yes — pharma work needs clean, repeatable accuracy, so we pay particular attention to feedback and drive faults that erode tolerance before they stop a machine.
Yes — France runs a stable 230V/400V 50Hz grid, the same standard as Germany, so no adaptation is needed. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Strasbourg?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
