Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Brno
Control electronics, servo drive and mechanical repair for Okuma machine tools across Brno — a machine-tool and precision-instrument centre in Moravia, and a world hub for electron microscopy.
OSP Control Specialists
Ultra-Precision & Machine-Tool Aware
230V / 400V — European-Compatible
Photo coming soon
Okuma Repair Support for Brno Manufacturers
Brno is the industrial and technology capital of Moravia — a deep machine-tool and mechanical-engineering base, a world centre for electron-microscopy and scientific-instrument manufacturing, and a growing technology and precision-engineering economy.
The Czech Republic is right next door to our German workshop, so a Brno repair genuinely works both ways: an on-site engineer visit, or ship-in, where you send us the faulty component and we bench-repair and return it. For a single board or drive, ship-in is often still the quicker option.
We’ve worked on Okuma’s OSP platform, and little else, for close to twenty years — not the FANUC or Siemens controls most general repairers in the Czech Republic know. That focus is what lets us decode an OSP fault the local service company can’t.
0
Years repairing Okuma electronics
0
Matches Brno’s power standard
0
Okuma model series supported
Moravia
Machine-tool & precision-instrument centre
A Machine-Tool and Precision-Instrument Centre
Brno’s work is disproportionately precision-critical — machine tools, and above all the electron-microscopy and scientific-instrument industry it’s famous for, where accuracy is measured at the finest scales. On this kind of machining a drifting encoder or a marginal drive quietly erodes accuracy long before it stops the machine, so feedback and positioning faults get the first and closest attention.
It’s exacting, heavily documented work to demanding standards, which helps an unexplained OSP fault stand out clearly against an otherwise controlled process.
Being inland in central Europe, the environmental factor here is the cold Czech winter — cold-start and condensation on machines in unheated bays — rather than coastal salt. Power is the European-standard 230V/400V at 50Hz, matching Germany.
Industries We Support Around Brno
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Machine Tools & Engineering
Component and sub-assembly work for the region’s machine-tool and engineering base.
Precision & Scientific Instruments
Ultra-tight-tolerance work for the electron-microscopy and instrument industry.
Technology & Electronics
Housings and precision parts for the city’s technology and electronics sector.
Machinery & Industrial
Sub-assembly and machinery work for the region’s industrial base.
Metal Fabrication
Structural and precision fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across Moravia.
Okuma Machines & OSP Controls We Support
We’re not tied to one machine family: the full Okuma CNC range is supported from your Brno facility — lathes and turning centers, MULTUS mill-turn, vertical and horizontal machining centers, 5-axis and double-column machines, grinders and older legacy platforms. Start from the Okuma models directory or the list of components we repair.
OSP is where Okuma differs most from other builders — it’s their in-house control, so FANUC or Siemens experience doesn’t transfer cleanly. We repair the whole OSP line, from OSP5000 and OSP700 through the P100–P300 generations to the current OSP-P500. A nameplate photo is enough for us to pin down the exact generation before anything ships.
Common Faults on Brno Okuma Machines
Encoder & feedback drift
On machine-tool and scientific-instrument work, a failing encoder or scale causes gradual drift that ruins tolerance before it stops the machine — we check feedback accuracy directly rather than assuming a drive fault.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain the most common reasons an OSP control won’t boot or throws alarms.
Servo & spindle drive faults
Overcurrent trips and feedback errors present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
Cold-start & condensation faults
Cold Moravian winters cause cold-start and condensation faults in unheated bays — the typical continental pattern here.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
How We Support a Repair in Brno
The Czech Republic is right next door to our German workshop, so a Brno repair genuinely works both ways: an on-site engineer visit, or ship-in, where you send us the faulty component and we bench-repair and return it. For a single board or drive, ship-in is often still the quicker option.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or Ship-In
We agree the faster route — an engineer visit over the short direct route, or removing the specific faulty component to send in.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then shipped back or refitted on-site at your Brno facility, ready to run.
We support Brno and the wider Moravia region — including Blansko, Vyškov and the surrounding South Moravian area. The drive to most Czech industrial regions is short and straightforward — genuinely one of the more convenient countries we support outside Germany itself — so on-site visits are a practical option here, not a last resort. Our emergency & express repair and retrofit & modernization services cover both the on-site and ship-in paths in more detail.
Other Cities We Serve Across the Czech Republic
Brno is one of the locations we cover — our Okuma repair support reaches manufacturers across the whole country, from Bohemia and the capital to Moravia and the Silesian industrial east.
Prague
The capital — aerospace, machinery and broad manufacturing.
Plzeň
A heavy-engineering, rail and brewing hub in West Bohemia.
Ostrava
The steel and heavy-industry heartland of Moravia-Silesia.
Mladá Boleslav
The home of Czech automotive manufacturing.
Liberec
A glass, crystal and automotive-supply hub in North Bohemia.
All of the Czech Republic
Back to our full Czech coverage overview.
Explore More Resources
Our Brno support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Czech Coverage
Back to our full Okuma repair overview for the Czech Republic.
Frequently Asked Questions
Yes — that work needs the tightest, most repeatable accuracy, so we pay particular attention to feedback and drive faults that erode tolerance before they ever stop a machine.
Both are genuinely practical — the Czech Republic is right next door, so we can send an engineer on-site or handle a single component as ship-in, which is often quicker for a board or drive.
Just the specific faulty component in almost every case. We’ll confirm what to send and how to remove it safely first.
Yes — 230V/400V at 50Hz matches the German and European standard, so no adaptation is needed. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Brno?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
