Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Sassuolo
Control electronics, servo drive and mechanical repair for Okuma machine tools across Sassuolo — the world capital of ceramic-tile manufacturing and the machinery that makes it.
OSP Control Specialists
Ceramic-Dust & Heat Aware
230V / 400V — European-Compatible
Photo coming soon
Okuma Repair Support for Sassuolo Manufacturers
Sassuolo is the world’s ceramic-tile capital — the centre of a district that produces a huge share of global tile output — and, just as importantly, the home of the ceramic-machinery industry that builds the presses, kilns and production lines for tile makers everywhere.
A Sassuolo repair can go two ways — on-site or ship-in — and we’re honest about the trade-off: the Alpine crossing adds travel time, so shipping a single faulty component to our German bench is often faster than an engineer making the drive.
For close to twenty years we’ve focused only on Okuma’s OSP control — a different platform from the FANUC and Siemens systems most general repairers know, and the reason Sassuolo’s ceramic-machinery shops reach out to us.
0
Years repairing Okuma electronics
0
Matches Sassuolo’s power standard
0
Okuma model series supported
Emilia-Romagna
World ceramic-tile & machinery district
Common Faults on Sassuolo Okuma Machines
Ceramic dust & heat faults
Fine, abrasive ceramic dust and kiln heat foul contacts and clog cooling more than a clean workshop would — the leading environmental suspect we check first on a Sassuolo machine.
Encoder & feedback drift
On automated ceramic-machinery production, a failing encoder or scale causes gradual drift that’s easy to mistake for a drive fault — we check feedback accuracy directly.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain common reasons an OSP control won’t boot or throws alarms.
Servo & spindle drive faults
Overcurrent trips and feedback errors present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
The World Capital of Ceramic Tile
Sassuolo’s ceramic industry gives it a distinctive environment for machine-tool electronics. Ceramic production is dusty and hot — fine, abrasive ceramic dust and the heat of kilns and presses find their way into cabinets and onto boards, fouling contacts and clogging cooling more than a clean workshop ever would.
So we treat a dust-and-heat check as an early step on a Sassuolo fault report, before assuming a purely component-level failure. The ceramic-machinery side also involves precise, automated production, so feedback faults get attention too.
Sassuolo sits in the humid Po Valley, adding condensation to the mix in cooler months. Power is the European-standard 230V/400V at 50Hz, matching Germany.
Industries We Support Around Sassuolo
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Ceramic Tile & Manufacturing
Component work for the world’s densest ceramic-tile production district.
Ceramic Machinery
Machining for the presses, kilns and line equipment that build the tile industry.
Automation & Robotics
Precision components for the sector’s automated ceramic-production lines.
Precision Engineering
Short-run and tight-tolerance work for the region’s precision shops.
Metal Fabrication
Structural and general fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across the ceramic district.
Okuma Machines & OSP Controls We Support
We’re not tied to one machine family: the full Okuma CNC range is supported from your Sassuolo facility — lathes and turning centers, MULTUS mill-turn, vertical and horizontal machining centers, 5-axis and double-column machines, grinders and older legacy platforms. Start from the Okuma models directory or the list of components we repair.
OSP is where Okuma differs most from other builders — it’s their in-house control, so FANUC or Siemens experience doesn’t transfer cleanly. We repair the whole OSP line, from OSP5000 and OSP700 through the P100–P300 generations to the current OSP-P500. A nameplate photo is enough for us to pin down the exact generation before anything ships.
How We Support a Repair in Sassuolo
A Sassuolo repair can go two ways — on-site or ship-in. We’re honest about the trade-off: the Alpine crossing, typically via the Brenner Pass, adds travel time, so shipping a single faulty component to our German bench is often faster than an engineer making the drive.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or Ship-In
We’re honest about the faster route — an engineer visit, or removing the specific faulty component to send in.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then shipped back or refitted on-site at your Sassuolo facility, ready to run.
We support Sassuolo and the wider ceramic district — including Fiorano Modenese, Formigine, Scandiano and the surrounding tile belt. Reaching Italy means crossing the Alps, typically via the Brenner Pass, so we’re honest about when an on-site visit makes sense versus ship-in. Our emergency & express repair and retrofit & modernization services cover both paths in more detail.
Other Cities We Serve Across Italy
Sassuolo is one of the locations we cover — our Okuma repair support reaches manufacturers across the industrial north, from Piedmont and Lombardy to the Emilia-Romagna machine belt and the Veneto.
Milan
Italy’s economic and machinery powerhouse in Lombardy.
Turin
The automotive and aerospace capital in Piedmont.
Bologna
The heart of Packaging Valley, in Emilia-Romagna.
Modena
The supercar and precision-engineering heart of Motor Valley.
Brescia
A steel, metallurgy and machine-tool district in Lombardy.
Vicenza
A mechanical-engineering and precision hub in the Veneto.
Genoa
A shipbuilding, port and marine centre on the Ligurian coast.
All of Italy
Back to our full Italy coverage overview.
Explore More Resources
Our Sassuolo support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Italy Coverage
Back to our full Okuma repair overview for Italy.
Frequently Asked Questions
Yes — fine, abrasive ceramic dust fouls contacts and connectors and clogs cooling, and kiln heat adds thermal stress, so we treat a dust-and-heat check as an early step on a Sassuolo machine.
Both — but we’re honest that the Alpine crossing adds travel time, so for a single board or drive ship-in is often faster than an engineer making the drive.
Just the specific faulty component in almost every case. We’ll confirm what to send and how to remove it safely first.
Yes — 230V/400V at 50Hz matches the German and European standard, so no adaptation is needed. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Sassuolo?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
