Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Eindhoven
Control electronics, servo drive and mechanical repair for Okuma CNC machines across Eindhoven — the Brainport high-tech heart of the Netherlands, where semiconductor equipment and ultra-precision engineering set the standard.
OSP Control Specialists
Ultra-Precision Aware
230V / 400V — European-Compatible
Photo coming soon
Okuma Repair Support for Eindhoven Manufacturers
Eindhoven is the high-tech heart of the Netherlands — the centre of the Brainport region, home to the world’s leading semiconductor-equipment industry, photonics, and a dense cluster of ultra-precision engineering and high-tech systems suppliers that machine to tolerances few places in the world can match.
We’re right next door in Germany, so an Eindhoven repair genuinely works both ways: an on-site engineer visit, or ship-in — you send us the specific faulty component and we bench-repair and return it. The drive from our workshop is a matter of hours.
Okuma’s OSP control has been our single focus for close to two decades. It’s a different platform from the FANUC and Siemens systems most Dutch CNC electronics repairers are built around, so when an OSP alarm log defeats the local service company, that specialisation is the gap we fill.
0
Years repairing Okuma electronics
0
Matches Eindhoven’s power standard
0
Okuma model series supported
Brainport
High-tech & semiconductor capital
Industries We Support Around Eindhoven
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Semiconductor Equipment
Ultra-precision parts for the region’s world-leading semiconductor-equipment industry.
Ultra-Precision Engineering
Tight-tolerance and prototype work for the Brainport precision cluster.
High-Tech Systems
Component and sub-assembly work for the region’s high-tech systems suppliers.
Medical Technology
High-accuracy parts for the area’s medical-device and health-technology makers.
Metal Fabrication
Structural and precision fabrication combined with Okuma machining.
General Machining & Job Shops
Independent contract shops running Okuma equipment across the region.
The High-Tech Heart of the Netherlands
Eindhoven’s work is about as precision-critical as machining gets — semiconductor equipment, photonics and high-tech systems demand ultra-tight, repeatable tolerances, so on these machines a drifting encoder or a marginally out-of-tune drive quietly puts parts out of spec long before it stops the machine. Feedback and positioning faults are the first thing we look at here.
It’s exacting, heavily documented work to demanding standards, which helps an unexplained OSP fault stand out clearly against an otherwise controlled process.
Electrically, the Netherlands runs 230V/400V at 50Hz, the same standard as Germany, so a repaired component returns to service without any voltage or frequency adaptation. We confirm the exact machine specification first.
Common Faults on Eindhoven Okuma Machines
Encoder & feedback drift
On ultra-precision semiconductor and high-tech work, a failing encoder or scale causes gradual drift that ruins tolerance before it stops the machine — we check feedback accuracy directly rather than assuming a drive fault.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components are still the most common reasons an OSP control won’t boot or throws intermittent alarms.
Servo & spindle drive faults
Overcurrent trips and encoder feedback errors present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
Spindle bearing wear
On precision machines even slight bearing wear shows up as finish and accuracy loss — noise and vibration point here rather than to the electronics.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Okuma Machines & OSP Controls We Support
Whatever sits on your Eindhoven shop floor, we cover the full Okuma catalogue — turning centers, MULTUS mill-turn platforms, vertical and horizontal machining centers, 5-axis, double-column machines and grinders, right back to legacy models. Browse the complete Okuma models directory, or jump straight to every component we repair for detail on a specific board, drive or assembly.
On the control side, OSP is Okuma’s own platform — not a re-badged FANUC or Siemens system — with its own diagnostics and board architecture. We cover every OSP generation: the floppy-era OSP5000, the OSP-P100 through P300 controls on most machines in service today, and the current OSP-P500. Send a photo of the control-cabinet nameplate and we’ll confirm the generation before anything ships.
How We Support a Repair in Eindhoven — On-Site or Ship-In
The Netherlands is right next door to our German workshop — the drive to most Dutch industrial regions is a matter of hours — so an Eindhoven repair genuinely works both ways: an on-site engineer visit, or ship-in, where you send us the faulty component and we bench-repair and return it.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or Ship-In
We agree the faster route — an engineer visit, or removing the specific faulty component to send in.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then shipped back or refitted on-site at your Eindhoven facility, ready to run.
We support Eindhoven and the wider Brainport region — including Veldhoven, Helmond, the High Tech Campus and the surrounding Brabant cluster. With direct road access from our German workshop, on-site engineer visits are a genuinely practical option here — not a last resort. Our emergency & express repair and retrofit & modernization services cover both the on-site and ship-in paths in more detail.
Other Cities We Serve Across the Netherlands
Eindhoven is one of the locations we cover — our Okuma repair support reaches manufacturers across the whole country, from the Randstad and Brabant’s high-tech cluster to Twente and the Limburg border.
Amsterdam
The capital — aviation, technology and broad manufacturing.
Rotterdam
Europe’s largest port and petrochemical hub.
The Hague
Offshore-energy and maritime centre on the coast.
Utrecht
Central logistics and machinery hub.
Enschede
The Twente precision and mechatronics cluster.
Venlo
Logistics and agrifood gateway on the German border.
Westland
World capital of greenhouse horticulture and grow-tech.
All of the Netherlands
Back to our full Dutch coverage overview.
Explore More Resources
Our Eindhoven support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Dutch Coverage
Back to our full Okuma repair overview for the Netherlands.
Frequently Asked Questions
Yes — that work needs the tightest, most repeatable accuracy, so we pay particular attention to feedback and drive faults that erode tolerance before they ever stop a machine.
Both are genuinely practical — we’re only hours away by road, so we can send an engineer on-site or handle it as ship-in, whichever gets your machine running faster.
Just the specific faulty component in almost every case — an OSP board, drive unit or encoder. We’ll confirm what to send and how to remove it safely first.
Yes — the Netherlands runs 230V/400V at 50Hz, the same standard as Germany, so no adaptation is needed. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation (a nameplate or startup-screen photo works well), any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Eindhoven?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
