Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Yanbu
Control electronics, servo drive and mechanical repair for Okuma CNC machines across Yanbu — the Red Sea petrochemical and refining hub of Saudi Arabia.
OSP Control Specialists
Petrochemical & Red Sea Aware
60Hz — 127V/220V Supply
Photo coming soon
Okuma Repair Support for Yanbu Manufacturers
Yanbu is the Kingdom’s Red Sea industrial city — the western twin of Jubail — a major petrochemical, refining and oil-terminal centre, with the heavy industry and port infrastructure that support the west-coast energy sector.
Saudi Arabia sits a long way from our German workshop, so ship-in repair is our clear standard recommendation for a Yanbu job: remove the specific faulty component, send it to us through the Kingdom’s air-cargo links, and we bench-repair it and return it tested and ready to refit.
Okuma’s OSP control has been our single focus for close to two decades — a different platform from the FANUC and Siemens systems most repairers in the region are built around, so a stubborn OSP fault is exactly what we’re set up for.
0
Years repairing Okuma electronics
0
Matches Saudi Arabia’s 60Hz standard
0
Okuma model series supported
Yanbu
The Red Sea petrochemical & refining hub
Common Faults on Yanbu Okuma Machines
Coastal salt-air & corrosion
Salt-laden humid Red Sea air drives gradual connector and contact corrosion — a leading suspect on an intermittent fault from a coastal machine.
Servo & spindle drive faults
Heavy petrochemical and refining work stresses drives hard — overcurrent trips and feedback errors are common, and we bench-test the drive electronics directly rather than assuming a motor problem.
Desert heat & dust faults
Extreme summer heat and airborne dust push cooling harder and foul contacts — thermal stress and intermittent faults we check alongside the coastal corrosion here.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain common reasons an OSP control won’t boot or throws alarms.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Industries We Support Around Yanbu
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Petrochemical & Refining
Machining and repair support for the city’s petrochemical and refining plant.
Refining & Oil Terminal
Component work for the region’s refining and oil-terminal industry.
Heavy Industry
Machining for the region’s heavy-industry and metals operations.
Port & Marine
Machining for the handling and marine equipment of the Red Sea port.
Metal Fabrication
Structural and heavy fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across the west coast.
The Petrochemical Twin on the Red Sea
Yanbu’s machining is heavy by nature — petrochemical, refining and oil-terminal plant run under sustained, high load — so drive strain and spindle-bearing wear are common and expected on a fault report here, more so than the fine-accuracy faults of a lighter shop.
As a working Red Sea port city, Yanbu sees salt-laden humid coastal air that drives connector corrosion, layered on the desert’s extreme summer heat and dust — so coastal corrosion, heat and dust are all factors we check on an intermittent fault here.
One electrical point matters: Saudi Arabia runs a 60Hz grid — a genuine outlier among its Gulf neighbours, most of which use 50Hz — at 127V/220V, closer to the American standard than Europe’s. So we confirm a machine’s exact voltage and frequency before any repaired component ships back.
Okuma Machines & OSP Controls We Support
Whatever sits on your Yanbu shop floor, we cover the full Okuma catalogue — turning centers, MULTUS mill-turn platforms, vertical and horizontal machining centers, 5-axis, double-column machines and grinders, right back to legacy models. Browse the complete Okuma models directory, or jump straight to every component we repair for detail on a specific board, drive or assembly.
On the control side, OSP is Okuma’s own platform — not a re-badged FANUC or Siemens system — with its own diagnostics and board architecture. We cover every OSP generation: the floppy-era OSP5000, the OSP-P100 through P300 controls on most machines in service today, and the current OSP-P500. Send a photo of the control-cabinet nameplate and we’ll confirm the generation before anything ships.
Getting an Okuma Repair To and From Yanbu
Distance is a fact of a Yanbu repair, but the process is deliberately freight-friendly: isolate the faulty board or drive, ship just that component to Germany through the Kingdom’s air-cargo links, and we return it repaired — regardless of where in the country you’re based.
1
Describe the Fault
Machine model, OSP control generation, voltage, alarm codes and a description or photo of what’s happening.
2
We Confirm the Component
We identify exactly what needs to ship, and how to remove it safely, before anything is disconnected.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Flown Back
Verified under load at your machine’s voltage, then returned by international air-cargo to your Yanbu facility, ready to reinstall.
We support Yanbu and the surrounding area — including Yanbu Industrial City, the petrochemical and refining complexes, the port and the central Red Sea coast. And we do travel — for a fault that genuinely needs hands-on diagnosis we can arrange an on-site engineer visit anywhere in the Kingdom; ship-in is simply the standard given the distance. Our emergency & express repair and retrofit & modernization services cover both paths in more detail.
Other Cities We Serve Across Saudi Arabia
Yanbu is one of the locations we cover — our Okuma repair support reaches manufacturers across the Kingdom, from the petrochemical and mining cities of the Gulf coast to the Red Sea industrial hubs and the inland capital.
Riyadh
The inland capital and a diversifying manufacturing base.
Jeddah
The Red Sea commercial and manufacturing gateway.
Dammam
The Eastern Province oil-services and port hub.
Dhahran
The oil-and-energy headquarters of the Kingdom.
Jubail
The world’s largest petrochemical industrial city.
Ras Al Khair
The mining, aluminium and maritime industrial city.
NEOM
The giga-project of advanced and green industry.
All of Saudi Arabia
Back to our full Saudi Arabia coverage overview.
Explore More Resources
Our Yanbu support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Saudi Arabia Coverage
Back to our full Okuma repair overview for Saudi Arabia.
Frequently Asked Questions
Over time, yes — salt-laden humid Red Sea air corrodes connectors and contacts, a classic source of intermittent faults, so we check for it early on a coastal machine.
It’s exactly why we confirm your machine’s specification carefully. Saudi Arabia runs 60Hz — a Gulf outlier, not Germany’s 50Hz — at 127V/220V, so the exact figures matter here.
Yes — you send only the specific faulty component, and the Kingdom’s air-cargo links to Europe are fast, so courier turnaround plus bench repair is usually measured in days. We confirm what to send first.
Yes — for a fault that genuinely needs hands-on diagnosis we can arrange an on-site visit; ship-in is simply the standard given the distance.
Your machine’s model, the OSP control generation, its voltage and any alarm codes shown, plus a short description of the fault.
Have an Okuma Machine Down in Yanbu?
Tell us the model, control generation, voltage and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
