Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Greece
Control electronics, servo drive and mechanical repair for Okuma machine tools across Greece’s maritime, metals and agricultural equipment manufacturing base — ship a faulty component to our German workshop from anywhere in the country.
OSP Control Specialists
World’s Largest Shipping Fleet — Piraeus Coverage
230V / 400V — European Standard
Photo coming soon
Okuma Repair Support for Greek Manufacturers
Greek shipowners control the largest merchant fleet tonnage of any nation on earth, and that scale supports a genuinely substantial ship repair and maritime equipment industry, concentrated heavily around Piraeus. Precision machining for vessel components, propulsion parts and marine equipment is some of the most demanding work we see from the region, and it’s a large part of why we’ve built specific familiarity with Greek manufacturing over the years.
We’ve spent close to twenty years focused specifically on Okuma’s OSP control platform — a genuinely different system from the FANUC and Siemens controls that most general CNC electronics repairers in Greece are built around. If your OSP control is showing an alarm history nobody locally can decode, or a machine has been sitting idle waiting on a board nobody nearby stocks, that’s precisely the gap our specialization fills.
Greece sits at the far southeastern edge of the countries we support, genuinely further from our German workshop than almost anywhere else in the EU — which makes ship-in repair, rather than routine on-site visits, our standard recommendation here. Electrically, Greece runs 230V/400V at 50Hz, the same standard used in Germany and across most of Europe, so components we repair return to service without any frequency or voltage adaptation.
0
Years repairing Okuma electronics
0
Matches Greece’s power standard
0
Okuma model series supported
#1 Fleet
World’s largest merchant shipping fleet, Greek-owned
Industries We Support in Greece
Greek manufacturing is genuinely anchored by the sea, alongside metals, mining and agricultural equipment sectors that keep Okuma machines working across the country.
Maritime & Ship Repair
Precision components for the ship repair and maintenance industry supporting the world’s largest merchant fleet.
Metals & Mining
Component machining supporting Greece’s aluminum, nickel and mineral extraction industries.
Food & Agricultural Equipment
Component machining for Greece’s significant olive oil and food processing industry.
Defense Manufacturing
Precision machining supporting Greece’s domestic defense production programs.
General Machining & Job Shops
Independent contract shops running Okuma equipment across the wider supply chain.
Metal Fabrication
General-purpose turning and milling supporting the wider industrial base.
The Furthest Corner of Europe We Support
Greece is genuinely the most distant EU country in our coverage — further from our German workshop than any other European market we support. That distance, combined with Greece’s own fragmented geography of mainland plus thousands of islands, means logistics here look different from almost anywhere else in Europe. Most industrial activity concentrates around Athens and Piraeus on the mainland, but a meaningful share of Okuma equipment we support sits on islands reachable only by ferry, adding a layer of complexity that doesn’t come up for a mainland European customer.
None of that makes support impractical — it just means ship-in repair is our clear standard recommendation here, and we plan any on-site visit with realistic timing that accounts for both the distance from Germany and, where relevant, an island crossing on top of it.
Common Faults on Greek Okuma Machines
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain the most common reasons an OSP control won’t boot or throws intermittent alarms.
Heat and salt-air corrosion faults
Mediterranean summer heat combined with coastal and port-side salt exposure is a common driver of connector corrosion and power-supply degradation, particularly for machines supporting the maritime sector.
Servo & spindle drive faults
Overcurrent trips and encoder feedback errors typically present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
Spindle bearing wear
Noise, vibration and finish-quality loss point toward bearing wear rather than an electronic fault, particularly on machines running heavy, continuous production cycles.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Okuma Machines We Support in Greece
Whatever’s on your shop floor, we support the full Okuma catalog. Browse the complete Okuma models directory for detail on any series.
Turning Centers
LB, GENOS L, LU and other Okuma lathe platforms.
Mill-Turn / MULTUS
Combined turning and milling in a single setup.
Vertical Machining Centers
GENOS M, MILLAC and MA-V/MB-V platforms.
Horizontal Machining Centers
MA-H, MB-H and the compact MS-320H line.
5-Axis Machining Centers
MU-V, MILLAC VH and the large-format MU-VIII/MU-10000H.
Double Column Machines
MCR, MCV-AII and VTR-A large-format platforms.
Grinders
GA/GP cylindrical and GI internal grinders.
Legacy Platforms
Cadet, Captain, CROWN, Howa-Okuma, MacTurn and more.
Components We Repair, and What Each One Does
Knowing what a part actually does makes it easier to describe a fault when you first contact us.
Control Boards
Interprets your program and coordinates every axis, spindle and tool change. We repair component by component rather than defaulting to a full swap.
Power Supply Units
Regulates the correct voltages to every board and drive. Heat and salt-air exposure are common causes of gradual degradation here.
Servo & Spindle Drives
Amplifiers that turn the control’s low-power signal into the current that drives each motor — a common source of axis faults.
Spindles & Bearing Replacement
Holds and rotates the tool or workpiece. Worn bearings cause noise and vibration; replacement restores accuracy without touching the electronics.
Axis & Feed Drives
Positions the tool or table along each axis. A fault shows up as positioning error or an axis that stops responding.
Turrets & ATC Systems
Selects and positions the cutting tool. We repair the motors, sensors and grippers involved, checked for corrosion in coastal installations.
Encoders & Feedback Devices
Report exactly where an axis or spindle is at every instant. A failing one causes drift that’s easy to mistake for a drive fault.
Operator Panels & Displays
Your window into the control. We repair both modern touchscreens and older CRT-style displays.
The OSP Control Platform
OSP is Okuma’s own control system, not a licensed FANUC or Siemens platform, with its own diagnostic tools and board architecture. We cover the complete range of OSP generations found in Greece — legacy floppy-disk-era controls like OSP3000 and OSP5000, the OSP-P100 through P300 generations common on most active machines today, and the current OSP-P500.
How Ship-In Repair Works From Greece
The process is the same whether your machine is on the mainland or one of the islands.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
We Confirm the Component
We identify exactly what needs to ship, and how to remove it safely, before anything is disconnected.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Shipped Back
Verified under load, then shipped back to your facility ready to reinstall.
For faults that genuinely need hands-on diagnosis at the machine, we also arrange on-site engineer visits, planned with realistic timing given the distance involved. Our emergency & express repair and retrofit & modernization services cover both paths in more detail.
Where We Support Okuma Machines Across Greece
Greek industry concentrates around a handful of mainland centres, with additional coverage extending to the islands.
Athens
Capital region with the broadest general manufacturing base.
Piraeus
Centre of Greece’s shipping and ship repair industry.
Thessaloniki
Northern Greece’s largest industrial and manufacturing centre.
Patras
Western port city and industrial centre.
Volos
Central Greek manufacturing and metalworking hub.
Heraklion
Crete’s largest city, reachable via island ship-in logistics.
Explore More Resources
Our Greece support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Countries We Serve
Every region our repair coverage extends to.
Frequently Asked Questions
Yes — the ship repair industry around Piraeus is one of the areas we support most regularly in Greece, alongside metals and agricultural equipment components.
Yes — our ship-in repair process works the same way regardless of whether a facility is on the mainland or an island. Get in touch with your site details and we’ll confirm the logistics for your specific location.
Just the specific faulty component in almost every case — a control board, drive unit, encoder or similar. We’ll confirm exactly what’s needed and how to remove it safely before you ship anything.
Yes — Greece uses the same 230V/400V, 50Hz standard as Germany and most of Europe, so no frequency or voltage adaptation is generally needed.
Your machine’s model, the OSP control generation (a nameplate or startup-screen photo works well), any alarm codes shown, and a description of the fault — that’s usually enough for a practical first assessment.
Have an Okuma Machine Down in Greece?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
