Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair for Job Shops & Contract Manufacturers
Independent electronics and mechanical repair for Okuma machines running the widest possible mix of work — prototypes, short runs, contract parts across a dozen industries, sometimes all in the same week.
35+ Configs
Machining center configurations in Okuma’s lineup alone
MULTUS / GENOS
Most common Okuma families in this sector
On-Site + Mail-In
Two ways we support job shops
Component-Level
Our default repair approach, not full-unit swap
Photo coming soon
Why Okuma Runs So Deep in Job Shops
If a shop makes a wide variety of parts, it needs extreme process flexibility — and that’s exactly what pulls job shops toward Okuma’s multitasking and machining center lineup. A shop running aerospace work one week and a one-off replacement part the next doesn’t have the luxury of dedicating a machine to a single process; it needs equipment that can pivot between jobs without giving up accuracy. We’ve seen this play out in real terms: an Indiana job shop uses a flexible manufacturing system to run aerospace work for long stretches and function more like a contract shop, while smaller operations solve genuinely unusual one-off jobs — down to machining custom hardware for a glass art sculpture on a live-tool lathe.
We support the electronics and mechanical side of that flexibility. A job shop can’t always predict which machine will be critical next week, which means every machine on the floor matters, not just the newest one. Our repair approach treats a twenty-year-old lathe with the same seriousness as a current-generation machining center, because in a job shop, it might be carrying just as much of the workload.
Typical Okuma Machines We See in Job Shops
Job shops tend to run the broadest mix of any customer type we work with — often several Okuma product families side by side on the same floor.
- MULTUS multitasking lathes — reduced setup time and fewer errors on genuinely varied part mixes
- GENOS L & M series — Okuma’s “Affordable Excellence” line, common across shops of every size
- LB series lathes & grinders — the workhorse equipment that quietly runs the bulk of day-to-day contract work
Photo coming soon
Work We See Come Through Job Shops
Unlike a dedicated production line, a job shop’s work list changes constantly — but a few categories come up again and again.
Prototype parts
Short production runs
Custom fixtures
Replacement parts
Contract components
Cross-industry work
One-off jobs
Where We Support Job Shops & Contract Manufacturers
Because job shops exist wherever manufacturing happens, our coverage here is broader than in more specialized sectors — several countries below are documented in detail. If your shop is in one of these regions, we already have local delivery experience.
Germany
United States
United Kingdom
Poland
Czech Republic
Italy
France
Netherlands
South Korea
Taiwan
Brazil
Mexico
Related Services for Job Shops
Beyond board and spindle repair, a few other parts of our business come up often in job shop environments specifically.
Photo coming soon
Two Ways We Support Your Shop
Job shops don’t all need the same thing from us, so we offer two genuinely different paths depending on what’s down and how urgent it is.
On-site repair. For faults that need hands on the machine — wiring, mechanical work, on-machine diagnostics — we send a technician to your facility. Our country coverage above reflects where we’ve built up this kind of on-site delivery experience.
Mail-in component repair. For a specific failed board, drive or spindle, many shops find it faster to ship us the component directly rather than wait for a site visit. We diagnose and repair it at component level in our workshop, then ship it back tested and ready to reinstall.
Common Faults We See in Job Shop Environments
A mixed fleet running mixed work creates a different fault pattern than a dedicated production line — age and variety both play a role.
01
Age-related faults on older, still-critical machines
Job shops often keep older machines running specifically for their capability, not just as backups — which means legacy control and drive faults show up here more than almost anywhere else.
02
Setup and changeover-related faults
Frequent job changeovers mean more parameter changes, tool changes and fixture swaps — more opportunities for a marginal sensor or interface to reveal itself.
03
Servo faults across widely varied cutting conditions
A machine that cuts aluminum on Monday and hardened steel on Wednesday puts servo drives through a broader stress range than dedicated single-material equipment.
04
Intermittent faults that are hard to reproduce on demand
With work changing constantly, a fault tied to a specific program or setup can be genuinely tricky to pin down — we build our diagnosis around what’s actually different about that job.
What We Repair
Component-level repair across the electronics and mechanical systems that keep a job shop’s mixed fleet running.
OSP Control Boards
Board-level repair across every OSP generation — job shops often have every generation on the floor at once.
Servo Drive Units
Axis and spindle drive repair across the full range of materials and cutting conditions a job shop sees.
Spindle Repair
Bearing, encoder and winding repair for spindles worn by varied, mixed-material production.
Power Supply Units
Regulates voltage across the control cabinet — a common root cause behind intermittent faults.
Operator Panels & Displays
Panel and display repair — heavily used across frequent setups and job changeovers.
Encoders & Feedback Systems
Position and velocity feedback repair for machines running across a wide range of cutting conditions.
Photo coming soon
Frequently Asked Questions
No. We are an independent repair company, not an authorized Okuma dealer, distributor or service partner. We repair Okuma CNC electronics and mechanical systems for job shops and contract manufacturers on their own equipment.
Often, yes — if the machine is still doing real work, component-level repair is usually far cheaper than replacement, even on legacy OSP generations. We repair every generation Okuma has shipped, not just current models.
Yes — mail-in component repair is one of our two core service paths, and for a specific known-faulty part, it’s often faster than scheduling a technician visit. We diagnose and repair it at component level, then ship it back tested.
Not at all — this is genuinely common in job shops. We repair every OSP control generation, from legacy floppy-disk-era controls through the current OSP-P500. See our OSP controls pages for details on your specific generations.
Quite possibly, yes — the countries listed reflect where we have established on-site delivery experience, not the limit of where we work. Mail-in component repair, in particular, isn’t limited by location. Contact us with your details and we’ll confirm.
Machine Down? Tell Us What’s Happening
Machine model, control generation, and the fault you’re seeing — we’ll help you figure out the fastest path back to production.
