Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Germany
Control electronics, servo drive and mechanical repair for Okuma machine tools across Germany — this is our home market, where we’re closest to every customer and fastest to respond.
OSP Control Specialists
Fastest Response of Any Country We Serve
Mittelstand & Maschinenbau Experience
Photo coming soon
Okuma Repair Support, Built From a German Workshop
Every repair we do for customers around the world runs through our German workshop — which means for customers actually in Germany, there’s no shipping decision to make, no cross-border logistics to plan around, and no waiting on international freight. We can typically be on-site faster here than anywhere else we support, and for component-level repairs, turnaround times are as short as they get.
Germany’s manufacturing base is also where a huge share of our day-to-day repair experience comes from. Close to twenty years working on Okuma’s OSP control platform, largely on machines running in German Mittelstand shops — the specialized, export-focused small and mid-size manufacturers that make up the backbone of German Maschinenbau — means we’ve seen an unusually wide cross-section of OSP faults, configurations, and retrofit histories. If a control is behaving strangely after years of service, there’s a good chance we’ve already diagnosed the same pattern on a machine down the road.
Electrically, there’s nothing to check here that isn’t already the baseline: 230V/400V at 50Hz is simply the German standard our components are built and tested against from the start.
0
Years repairing Okuma electronics
0
Okuma model series supported
Home Market
Our workshop is based here
Auf der Hohl 4, 57610 Birnbach
Fastest Turnaround
No cross-border shipping or logistics involved
Industries We Support in Germany
Germany’s industrial base is genuinely broad, and our work here reflects nearly every sector Okuma equipment is used in.
Automotive
High-volume component production across Germany’s OEM and supplier network.
Mechanical Engineering (Maschinenbau)
The specialized Mittelstand manufacturers at the core of German industry.
Aerospace
Precision component work across Germany’s significant aerospace supply chain.
Semiconductor & Electronics
Precision components supporting Germany’s growing semiconductor manufacturing base.
Medical Technology
Precision implant and instrument components at tight tolerances.
Precision Tool Making
Die and mold shops needing tight-tolerance, high-accuracy machining.
What Being Based Here Actually Means for You
Every other country page on this site talks about how we bridge distance — ship-in repair, fast freight, planning around time zones or customs. None of that applies here. A German customer can call, describe a fault, and have us on-site or working the component in our own workshop the same day in many cases, with none of the coordination overhead that comes with an international repair. If a fault is genuinely urgent, we’re not routing it through a shipping decision first.
That proximity also shapes how deeply we know this market. German industry runs on a dense mix of regional specializations — heavy engineering around the Ruhr, automotive and precision manufacturing concentrated in the south, semiconductor production expanding around Dresden — and being close to all of it means we’re not learning a region’s quirks from a distance. We’re already there.
Common Faults on German Okuma Machines
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components remain the most common reasons an OSP control won’t boot or throws intermittent alarms.
Servo & spindle drive faults
Overcurrent trips and encoder feedback errors typically present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
Spindle bearing wear
Noise, vibration and finish-quality loss point toward bearing wear rather than an electronic fault, particularly on machines running heavy, continuous production cycles.
ATC and turret faults
Tool-change failures are usually mechanical or sensor issues rather than control faults, though we always confirm the control’s tool-change logic first to rule out a software-side cause.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Okuma Machines We Support in Germany
Whatever’s on your shop floor, we support the full Okuma catalog. Browse the complete Okuma models directory for detail on any series.
Turning Centers
LB, GENOS L, LU and other Okuma lathe platforms.
Mill-Turn / MULTUS
Combined turning and milling in a single setup.
Vertical Machining Centers
GENOS M, MILLAC and MA-V/MB-V platforms.
Horizontal Machining Centers
MA-H, MB-H and the compact MS-320H line.
5-Axis Machining Centers
MU-V, MILLAC VH and the large-format MU-VIII/MU-10000H.
Double Column Machines
MCR, MCV-AII and VTR-A large-format platforms.
Grinders
GA/GP cylindrical and GI internal grinders.
Legacy Platforms
Cadet, Captain, CROWN, Howa-Okuma, MacTurn and more.
Components We Repair, and What Each One Does
Knowing what a part actually does makes it easier to describe a fault when you first contact us.
Control Boards
Interprets your program and coordinates every axis, spindle and tool change. We repair component by component rather than defaulting to a full swap.
Servo & Spindle Drives
Amplifiers that turn the control’s low-power signal into the current that drives each motor — a common source of axis faults.
Spindles & Bearing Replacement
Holds and rotates the tool or workpiece. Worn bearings cause noise and vibration; replacement restores accuracy without touching the electronics.
Operator Panels & Displays
Your window into the control. We repair both modern touchscreens and older CRT-style displays.
Axis & Feed Drives
Positions the tool or table along each axis. A fault shows up as positioning error or an axis that stops responding.
Turrets & ATC Systems
Selects and positions the cutting tool. We repair the motors, sensors and grippers involved.
Power Supply Units
Regulates the correct voltages to every board and drive in the cabinet — one of the first places we check on any diagnosis.
Encoders & Feedback Devices
Report exactly where an axis or spindle is at every instant. A failing one causes drift that’s easy to mistake for a drive fault.
The OSP Control Platform
OSP is Okuma’s own control system, not a licensed FANUC or Siemens platform, with its own diagnostic tools and board architecture. We cover the complete range of OSP generations found in Germany — legacy floppy-disk-era controls like OSP3000 and OSP5000, the OSP-P100 through P300 generations common on most active machines today, and the current OSP-P500.
How a German Repair Works
Being local changes the calculus in your favor from the first call.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description of what’s happening.
2
Same-Day Assessment
We confirm whether the fault needs an on-site visit or can be resolved via component swap and bench repair.
3
Repair, Fast
On-site diagnosis and repair, or component-level bench work at our workshop — both move quickly here.
4
Verified Before We’re Done
Every repair is tested under load before we consider the job complete.
See our emergency & express repair and retrofit & modernization services for more on how we handle both urgent and planned work.
Where We Support Okuma Machines Across Germany
German manufacturing spans the whole country, with a few regions carrying particular concentrations of Okuma equipment.
Our Workshop — Birnbach
Auf der Hohl 4, 57610 Birnbach, Germany — where every repair is diagnosed and bench-tested.
Stuttgart
Heart of Baden-Württemberg’s automotive and precision engineering base.
Munich
Major Bavarian manufacturing, automotive and aerospace centre.
Frankfurt
Central German logistics and industrial hub.
Cologne
Western industrial centre with a broad general manufacturing base.
Essen
Historic centre of the Ruhrgebiet’s heavy industry and engineering.
Hamburg
Major port city with a substantial aerospace and general industry base.
Dresden
Centre of “Silicon Saxony,” Germany’s semiconductor manufacturing hub.
Nuremberg
Bavarian precision engineering and Mittelstand manufacturing centre.
Berlin
The capital — a broad, diverse industrial, technology and engineering base.
Düsseldorf
Lower Rhine centre for steel, metals and machine building.
Dortmund
Eastern Ruhr hub, reinvented from steel to technology and machinery.
Duisburg
Germany’s steel capital and Europe’s largest inland port.
Leipzig
Saxony’s automotive-assembly and logistics powerhouse.
Hannover
Lower Saxony centre for machinery and commercial vehicles.
Bremen
Northern aerospace, shipbuilding and steel centre on the Weser.
Chemnitz
Saxony’s historic machine-tool and mechanical-engineering city.
Wolfsburg
Germany’s automotive capital and the home of Volkswagen.
Mannheim
Rhine-Neckar centre for engines, turbines and heavy engineering.
Explore More Resources
Our support in Germany connects to the same set of Okuma repair resources we offer everywhere — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship or collect.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Countries We Serve
Every region our repair coverage extends to.
Frequently Asked Questions
Faster than anywhere else we support, since there’s no international logistics involved. Many faults can be assessed the same day, and on-site visits or component repairs typically move quickly given how close we already are.
A large share of our day-to-day work is with Mittelstand-scale Maschinenbau shops — specialized, export-focused manufacturers — but we support Okuma equipment across companies of every size, from single-machine job shops to large production facilities.
Given how close we are, both options are fast here. We’ll recommend whichever genuinely suits the fault once we understand what’s happening.
Yes — the regions listed are simply where we see the highest concentration of Okuma equipment. Our support covers all of Germany.
Your machine’s model, the OSP control generation (a nameplate or startup-screen photo works well), any alarm codes shown, and a description of the fault — that’s usually enough for a practical first assessment.
Have an Okuma Machine Down in Germany?
Tell us the model, control generation and what’s happening — as a local customer, you’ll get our fastest possible response.
