Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Nuremberg
Control electronics, servo drive and mechanical repair for Okuma CNC machines across Nuremberg — an automation, electronics and machinery hub in Franconia, and part of our home market.
OSP Control Specialists
Home Market — Fastest Response
230V / 400V — German Standard
Photo coming soon
Okuma Repair Support for Nuremberg Manufacturers
Nuremberg is the industrial heart of Franconia — a strong base in industrial automation and electronics, machinery and engineering, with a deep manufacturing tradition and an automotive-supplier network across northern Bavaria.
This is our home market, so a Nuremberg repair is as fast and direct as it gets: no shipping decision, no cross-border logistics, no international freight. We reach you on-site quickly, or you send the faulty component to our Birnbach bench — tested before it goes back.
Okuma’s OSP control has been our single focus for close to two decades — a different platform from the FANUC and Siemens systems most repairers are built around, so a stubborn OSP fault is exactly what we’re set up for.
0
Years repairing Okuma electronics
Home
Market — fastest response of all
0
Okuma model series supported
Franconia
Automation, electronics & machinery hub
Common Faults on Nuremberg Okuma Machines
Encoder & feedback drift
On automation and electronics work, a failing encoder or scale causes gradual drift that’s easy to mistake for a drive fault — we check feedback accuracy directly, since a subtle error ruins tolerance before it stops the machine.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components are the most common reasons an OSP control won’t boot or throws intermittent alarms.
Servo & spindle drive faults
Overcurrent trips and feedback errors present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
Cold-start & condensation faults
Cold Franconian winters cause cold-start and condensation faults in unheated bays — the typical continental pattern here.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Industries We Support Around Nuremberg
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Automation & Robotics
Precision components for the region’s strong industrial-automation and robotics sector.
Electronics & Technology
Housings and precision parts for the area’s electronics and technology manufacturers.
Machinery & Engineering
Sub-assembly and machinery work for the region’s engineering base.
Precision Engineering
Short-run and tight-tolerance work for the region’s precision shops.
Metal Fabrication
Structural and general fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across Franconia.
Automation and Electronics in Franconia
Nuremberg’s automation and electronics work is precision-driven, where feedback accuracy is everything — so on this kind of machining a drifting encoder or a marginal drive quietly erodes accuracy before it stops the machine, and feedback and positioning faults get particular attention.
Alongside the automation and electronics base sits a broad machinery and automotive-supplier sector, so we keep an open mind on failure modes and let each machine’s actual duty guide the diagnosis.
There’s no adaptation needed — 230V/400V at 50Hz is the German standard our components are built and tested against. Franconia’s cold winters make cold-start and condensation the main environmental factor to check.
Okuma Machines & OSP Controls We Support
Whatever sits on your Nuremberg shop floor, we cover the full Okuma catalogue — turning centers, MULTUS mill-turn platforms, vertical and horizontal machining centers, 5-axis, double-column machines and grinders, right back to legacy models. Browse the complete Okuma models directory, or jump straight to every component we repair for detail on a specific board, drive or assembly.
On the control side, OSP is Okuma’s own platform — not a re-badged FANUC or Siemens system — with its own diagnostics and board architecture. We cover every OSP generation: the floppy-era OSP5000, the OSP-P100 through P300 controls on most machines in service today, and the current OSP-P500. Send a photo of the control-cabinet nameplate and we’ll confirm the generation before anything ships.
How a Repair in Nuremberg Works
This is our home market — we’re based in Germany — so a Nuremberg repair is as fast and direct as it gets: no shipping decision to make, no cross-border logistics, and no waiting on international freight. We reach you on-site quickly, or you send the faulty component to our Birnbach bench.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or to the Bench
We come to you on-site, or you send the specific faulty component to our Birnbach workshop — no freight or customs to worry about.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then refitted on-site or delivered back — fast, because there’s no international freight in the way.
We support Nuremberg and the wider Franconia region — including Fürth, Erlangen and the surrounding northern-Bavaria area. As our home market, Germany gets our fastest response — we’re closest to every customer here. Our emergency & express repair and retrofit & modernization services cover both the on-site and bench paths in more detail.
Other Cities We Serve Across Germany
Nuremberg is one of the locations we cover — as our home market, we reach manufacturers faster here than anywhere — from the southern automotive heartland to the Rhine, the Ruhr, Saxony and the northern ports.
Stuttgart
Germany’s automotive and precision-engineering heartland.
Munich
An automotive, aerospace and high-technology hub in Bavaria.
Frankfurt
A chemical, pharmaceutical and machinery centre in Hesse.
Cologne
An automotive, chemical and machinery hub on the Rhine.
Essen
The steel, heavy-industry and energy heartland of the Ruhr.
Hamburg
An aerospace, shipbuilding and port centre in the north.
Dresden
Silicon Saxony — the heart of Europe’s semiconductor industry.
All of Germany
Back to our full Germany coverage overview.
Explore More Resources
Our Nuremberg support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Germany Coverage
Back to our full Okuma repair overview for Germany.
Frequently Asked Questions
Fast — this is our home market, so there’s no shipping decision or international freight to plan around. We reach you on-site quickly, or turn a component around at our Birnbach bench.
Yes — that work needs fine, repeatable accuracy, so we pay particular attention to feedback and drive faults that erode tolerance before they stop a machine.
Just the specific faulty component in almost every case. We’ll confirm what’s needed and how to remove it safely, or come to the machine.
None — 230V/400V at 50Hz is the German standard our repaired components are built and tested against from the start.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Nuremberg?
Tell us the model, control generation and what’s happening — this is our home market, so we’ll get to you fast.
