Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Mulhouse
Control electronics, servo drive and mechanical repair for Okuma machine tools across Mulhouse — an automotive and mechanical-engineering hub in southern Alsace, close to the German and Swiss borders.
OSP Control Specialists
Automotive & Border-Region Aware
230V / 400V — European-Compatible
Photo coming soon
Okuma Repair Support for Mulhouse Manufacturers
Mulhouse anchors southern Alsace at the meeting point of France, Germany and Switzerland — a strong automotive-manufacturing city with a deep mechanical-engineering base and a long industrial heritage rooted in machinery and textiles.
Its border location is a real advantage: Alsace is close enough to our German workshop for a convenient on-site visit, so a Mulhouse repair works both ways — an engineer on-site, or ship-in, where you send us the faulty component. For a single board or drive, ship-in is often still the quicker option.
For close to twenty years we’ve focused only on Okuma’s OSP control — not the FANUC and Siemens systems most general CNC electronics repairers know. That’s the specialisation Mulhouse’s automotive and machinery shops reach for when a local repairer can’t decode an OSP fault.
0
Years repairing Okuma electronics
0
Matches Mulhouse’s power standard
0
Okuma model series supported
Alsace
Automotive & mechanical hub on the border
Common Faults on Mulhouse Okuma Machines
Encoder & feedback drift
On automotive precision work, a failing encoder or scale causes gradual drift that puts parts out of tolerance before anything stops — we check feedback accuracy directly rather than assuming a drive fault.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components are the most common reasons an OSP control won’t boot or throws intermittent alarms.
Servo & spindle drive faults
Overcurrent trips and feedback errors present as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than assuming a motor issue.
Cold-start & condensation faults
Cold southern-Alsace winters cause cold-start and condensation faults in unheated bays — the typical continental pattern here.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Industries We Support Around Mulhouse
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Automotive Manufacturing
Machining for the region’s vehicle assembly and automotive-parts producers.
Machinery & Mechanical
Sub-assembly and machinery work for the region’s deep engineering base.
Precision Engineering
Short-run and tight-tolerance work for the automotive supply chain.
Electronics & Technology
Housings and precision parts for the tri-border electronics sector.
Metal Fabrication
Structural and general fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across southern Alsace.
Automotive Alsace on the Border
Mulhouse’s automotive work is repeatability-driven, so feedback and positioning faults get particular attention: on vehicle and component production a drifting encoder or a marginal drive quietly puts parts out of spec long before it stops the machine.
Right at the tri-border corner, Mulhouse is one of the closest French cities to our workshop, which makes on-site support unusually quick when a fault genuinely needs hands-on diagnosis.
France runs a notably stable 230V/400V 50Hz grid, the same standard as Germany, so a repaired component returns without adaptation. Southern Alsace’s continental winters make cold-start and condensation a real factor to check.
Okuma Machines & OSP Controls We Support
We’re not tied to one machine family: the full Okuma CNC range is supported from your Mulhouse facility — lathes and turning centers, MULTUS mill-turn, vertical and horizontal machining centers, 5-axis and double-column machines, grinders and older legacy platforms. Start from the Okuma models directory or the list of components we repair.
OSP is where Okuma differs most from other builders — it’s their in-house control, so FANUC or Siemens experience doesn’t transfer cleanly. We repair the whole OSP line, from OSP5000 and OSP700 through the P100–P300 generations to the current OSP-P500. A nameplate photo is enough for us to pin down the exact generation before anything ships.
How We Support a Repair in Mulhouse
Eastern France — Alsace — is close enough to our German workshop for a convenient on-site visit, so a Mulhouse repair genuinely works both ways: an engineer on-site, or ship-in, where you send us the faulty component and we bench-repair and return it. For a single board or drive, ship-in is often still the quicker option.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or Ship-In
We agree the faster route for your location — an engineer visit, or removing the specific faulty component to send in.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then shipped back or refitted on-site at your Mulhouse facility, ready to run.
We support Mulhouse and the wider region — including the tri-border area, Colmar and southern Alsace. Support is geography-dependent — an eastern facility might see us on-site quickly, while a southwestern one is usually better served by ship-in — and we’re honest about which suits your location. Our emergency & express repair and retrofit & modernization services cover both paths in more detail.
Other Cities We Serve Across France
Mulhouse is one of the locations we cover — our Okuma repair support reaches manufacturers across the whole country, from the German-border east to the Atlantic west and the aerospace southwest.
Paris
The Île-de-France base — aerospace, defence and broad manufacturing.
Toulouse
Europe’s aerospace and space capital.
Lyon
An industrial, chemical and machinery hub on the Rhône.
Grenoble
A microelectronics and high-tech centre in the Alps.
Strasbourg
Cross-border Alsace industry — the closest to Germany by road.
Bordeaux
An aerospace, defence and laser centre on the Atlantic southwest.
Nantes
An aerospace, shipbuilding and energy hub on the Atlantic.
All of France
Back to our full France coverage overview.
Explore More Resources
Our Mulhouse support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
France Coverage
Back to our full Okuma repair overview for France.
Frequently Asked Questions
Yes — it’s at the tri-border corner and among the closest French cities to our workshop, which makes an on-site visit especially convenient. Ship-in is still often quicker for a single board or drive.
Yes — vehicle and component production needs consistent accuracy, so we pay particular attention to feedback and drive faults that put parts out of tolerance before they ever stop a machine.
Just the specific faulty component in almost every case. We’ll confirm what to send and how to remove it safely first.
Yes — France runs a stable 230V/400V 50Hz grid, the same standard as Germany, so no adaptation is needed. We still confirm your machine’s exact specification before any repair ships.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Mulhouse?
Tell us the model, control generation and what’s happening — we’ll confirm the fastest realistic path to getting it running again.
