Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Berlin
Control electronics, servo drive and mechanical repair for Okuma CNC machines across Berlin — the capital and a broad, diverse industrial and technology base, and part of our home market.
OSP Control Specialists
Home Market — Fastest Response
230V / 400V — German Standard
Photo coming soon
Okuma Repair Support for Berlin Manufacturers
Berlin is not only Germany’s capital but one of its most diverse industrial cities — a base for rail and transport technology, gas turbines and energy equipment, pharmaceuticals and life sciences, electronics, and a dense layer of machinery and general engineering.
Being based here changes everything for a Berlin repair: we’re closest to you and fastest to respond — an on-site engineer visit, or component-level bench work at our German workshop, with no freight to plan around.
Okuma’s OSP control has been our single focus for close to two decades. It’s a different platform from the FANUC and Siemens systems most general CNC electronics repairers are built around, so when an OSP alarm log defeats a local service company, that specialisation is the gap we fill.
0
Years repairing Okuma electronics
Home
Market — fastest response of all
0
Okuma model series supported
Berlin
The capital — a broad, diverse industrial base
Industries We Support Around Berlin
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Rail & Transport Technology
Precision components for the capital’s rail-vehicle and transport-engineering industry.
Turbines & Energy Equipment
Machining for Berlin’s gas-turbine and energy-equipment manufacturing.
Pharma & Life Sciences
Clean, precise parts for the city’s pharmaceutical and life-sciences equipment.
Electronics & Technology
Housings and precision parts for the area’s electronics and technology sector.
Machinery & Engineering
Sub-assembly and machinery work for the region’s broad engineering base.
General Machining & Job Shops
Independent contract shops running Okuma equipment across the capital region.
A Broad Industrial Base in the Capital
Berlin’s manufacturing is unusually broad — rail and transport engineering, turbines and energy equipment, pharma, electronics and machinery all sit within the city — so we don’t assume one failure mode. A turbine builder’s heavy-duty fault reads very differently from a pharmaceutical precision shop’s, and we start by asking what the machine actually does.
That breadth means we let each machine’s real duty guide the diagnosis rather than reaching for a single pattern — the great advantage of a specialist who reads the OSP control directly rather than swapping boards on a hunch.
There’s nothing to adapt here: 230V/400V at 50Hz is simply the German standard our components are built and tested against from the start. The continental climate’s cold winters mean cold-start and condensation are the main environmental factor to check.
Common Faults on Berlin Okuma Machines
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components are still the most common reasons an OSP control won’t boot or throws intermittent alarms.
Servo & spindle drive faults
Overcurrent trips and encoder feedback errors usually show up as an axis or spindle that won’t move correctly — we bench-test the drive electronics directly rather than blaming the motor.
Encoder & feedback drift
On pharma and precision work a failing encoder or scale causes gradual drift that’s easy to mistake for a drive fault — we check feedback accuracy directly.
Cold-start & condensation faults
Cold German winters cause cold-start and condensation faults in unheated bays — the typical continental pattern here.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Okuma Machines & OSP Controls We Support
Whatever sits on your Berlin shop floor, we cover the full Okuma catalogue — turning centers, MULTUS mill-turn platforms, vertical and horizontal machining centers, 5-axis, double-column machines and grinders, right back to legacy models. Browse the complete Okuma models directory, or jump straight to every component we repair for detail on a specific board, drive or assembly.
On the control side, OSP is Okuma’s own platform — not a re-badged FANUC or Siemens system — with its own diagnostics and board architecture. We cover every OSP generation: the floppy-era OSP5000, the OSP-P100 through P300 controls on most machines in service today, and the current OSP-P500. Send a photo of the control-cabinet nameplate and we’ll confirm the generation before anything ships.
How a Repair in Berlin Works
Being based here changes everything for a Berlin repair: we’re closest to you and fastest to respond — an on-site engineer visit, or component-level bench work at our German workshop, with no freight to plan around.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or to the Bench
We come to you on-site, or you send the specific faulty component to our Birnbach workshop — no freight or customs to worry about.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then refitted on-site or delivered back — fast, because there’s no international freight in the way.
We support Berlin and the surrounding region — including the Marzahn and Spandau industrial areas, Brandenburg’s manufacturing sites and the wider capital region. As our home market, Germany gets our fastest response — we’re closest to every customer here. Our emergency & express repair and retrofit & modernization services cover both the on-site and bench paths in more detail.
Other Cities We Serve Across Germany
Berlin is one of the locations we cover — as our home market, we reach manufacturers faster here than anywhere — from the southern automotive heartland to the Rhine, the Ruhr, Saxony and the northern ports.
Stuttgart
Germany’s automotive and precision-engineering heartland.
Munich
An automotive, aerospace and high-technology hub in Bavaria.
Frankfurt
A chemical, pharmaceutical and machinery centre in Hesse.
Cologne
An automotive, chemical and machinery hub on the Rhine.
Essen
The steel, heavy-industry and energy heartland of the Ruhr.
Hamburg
An aerospace, shipbuilding and port centre in the north.
Nuremberg
An automation, electronics and machinery hub in Franconia.
Dresden
Silicon Saxony — the heart of Europe’s semiconductor industry.
Düsseldorf
Steel, metals and machinery on the Lower Rhine.
Dortmund
The Ruhr’s reinvention — steel heritage to tech and machinery.
Duisburg
Germany’s steel capital and Europe’s largest inland port.
Leipzig
An automotive and logistics powerhouse in Saxony.
Hannover
Machinery and commercial vehicles in Lower Saxony.
Bremen
Aerospace, shipbuilding and steel on the Weser.
Chemnitz
Germany’s machine-tool and mechanical-engineering city.
Wolfsburg
Germany’s automotive capital — the home of Volkswagen.
Mannheim
Engines, turbines and heavy engineering on the Rhine-Neckar.
All of Germany
Back to our full Germany coverage overview.
Explore More Resources
Our Berlin support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Germany Coverage
Back to our full Okuma repair overview for Germany.
Frequently Asked Questions
Fast — this is our home market, so there’s no shipping decision or international freight to plan around. We reach you on-site quickly, or turn a component around at our Birnbach bench.
Yes — reading the OSP control directly means we diagnose by what the machine actually does, whether that’s a turbine part, a pharma component or a general engineering job, rather than assuming one failure pattern.
Just the specific faulty component in almost every case — an OSP board, drive unit or encoder. We’ll confirm what’s needed and how to remove it safely, or come to the machine.
None — 230V/400V at 50Hz is the German standard our repaired components are built and tested against from the start.
Your machine’s model, the OSP control generation (a nameplate or startup-screen photo works well), any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Berlin?
Tell us the model, control generation and what’s happening — this is our home market, so we’ll get to you fast.
