Monday to Saturday - 8:00 -18:00 (CET/CEST)
Okuma CNC Repair Services in Hannover
Control electronics, servo drive and mechanical repair for Okuma CNC machines across Hannover — a machinery and commercial-vehicle centre in Lower Saxony, and part of our home market.
OSP Control Specialists
Home Market — Fastest Response
230V / 400V — German Standard
Photo coming soon
Okuma Repair Support for Hannover Manufacturers
Hannover is a major engineering city and the home of the world’s largest industrial trade fair — a base for machinery and mechanical engineering, commercial-vehicle and tyre manufacturing, electronics and a deep supplier network across Lower Saxony.
Being based here changes everything for a Hannover repair: we’re closest to you and fastest to respond — an on-site engineer visit, or component-level bench work at our German workshop, with no freight to plan around.
We’ve worked on Okuma’s OSP platform, and little else, for close to twenty years — not the FANUC or Siemens controls most general repairers are built around. That focus is what lets us decode an OSP fault a local service company can’t.
0
Years repairing Okuma electronics
Home
Market — fastest response of all
0
Okuma model series supported
Lower Saxony
Machinery & commercial-vehicle centre
Machinery and Commercial Vehicles in Lower Saxony
Hannover’s machinery and commercial-vehicle work covers a broad span — heavy machine building and vehicle production alongside tyre and component manufacturing — so drive and mechanical faults share the caseload with the control and feedback questions of the lighter precision work.
As a long-standing engineering centre, its shops keep exacting, well-documented processes, which helps an unexplained OSP fault stand out clearly against an otherwise controlled operation.
There’s no adaptation needed — 230V/400V at 50Hz is the German standard our components are built and tested against. The temperate-to-cold winters make cold-start and condensation the main environmental factor.
Common Faults on Hannover Okuma Machines
Servo & spindle drive faults
Heavy machine-building and commercial-vehicle work stresses drives hard — overcurrent trips and feedback errors are common, and we bench-test the drive electronics directly rather than blaming the motor.
OSP control board faults
Corrupted parameter memory, dying backup batteries and failed power-supply components are the most common reasons an OSP control won’t boot or throws intermittent alarms.
Encoder & feedback drift
On the precision component work, a failing encoder or scale causes gradual drift that’s easy to mistake for a drive fault — we check feedback accuracy directly.
Cold-start & condensation faults
Cold winters cause cold-start and condensation faults in unheated bays — the typical continental pattern here.
See our fault analysis and testing & diagnostics services for more on our diagnostic approach.
Industries We Support Around Hannover
The region’s manufacturing has its own character — here are the sectors we most often support locally.
Machinery & Engineering
Sub-assembly and machinery work for the region’s deep machine-building base.
Commercial Vehicles
Components for the region’s commercial-vehicle and tyre manufacturing.
Automotive Supply
Component work for the region’s automotive-supplier network.
Electronics & Technology
Housings and precision parts for the area’s electronics and technology sector.
Metal Fabrication
Structural and general fabrication combined with Okuma machining.
General Machining & Job Shops
Contract shops running Okuma equipment across Lower Saxony.
Okuma Machines & OSP Controls We Support
Whatever sits on your Hannover shop floor, we cover the full Okuma catalogue — turning centers, MULTUS mill-turn platforms, vertical and horizontal machining centers, 5-axis, double-column machines and grinders, right back to legacy models. Browse the complete Okuma models directory, or jump straight to every component we repair for detail on a specific board, drive or assembly.
On the control side, OSP is Okuma’s own platform — not a re-badged FANUC or Siemens system — with its own diagnostics and board architecture. We cover every OSP generation: the floppy-era OSP5000, the OSP-P100 through P300 controls on most machines in service today, and the current OSP-P500. Send a photo of the control-cabinet nameplate and we’ll confirm the generation before anything ships.
How a Repair in Hannover Works
Being based here changes everything for a Hannover repair: we’re closest to you and fastest to respond — an on-site engineer visit, or component-level bench work at our German workshop, with no freight to plan around.
1
Describe the Fault
Machine model, OSP control generation, alarm codes and a description or photo of what’s happening.
2
On-Site or to the Bench
We come to you on-site, or you send the specific faulty component to our Birnbach workshop — no freight or customs to worry about.
3
Bench Repair in Germany
Diagnosed and repaired at component level on our workbench, not simply swapped for new.
4
Tested & Back in Service
Verified under load, then refitted on-site or delivered back — fast, because there’s no international freight in the way.
We support Hannover and the wider Lower Saxony region — including Hildesheim, Wolfsburg, Braunschweig and the surrounding area. As our home market, Germany gets our fastest response — we’re closest to every customer here. Our emergency & express repair and retrofit & modernization services cover both the on-site and bench paths in more detail.
Other Cities We Serve Across Germany
Hannover is one of the locations we cover — as our home market, we reach manufacturers faster here than anywhere — from the southern automotive heartland to the Rhine, the Ruhr, Saxony and the northern ports.
Stuttgart
Germany’s automotive and precision-engineering heartland.
Munich
An automotive, aerospace and high-technology hub in Bavaria.
Frankfurt
A chemical, pharmaceutical and machinery centre in Hesse.
Cologne
An automotive, chemical and machinery hub on the Rhine.
Essen
The steel, heavy-industry and energy heartland of the Ruhr.
Hamburg
An aerospace, shipbuilding and port centre in the north.
Nuremberg
An automation, electronics and machinery hub in Franconia.
Dresden
Silicon Saxony — the heart of Europe’s semiconductor industry.
Berlin
The capital — a broad, diverse industrial and technology base.
Düsseldorf
Steel, metals and machinery on the Lower Rhine.
Dortmund
The Ruhr’s reinvention — steel heritage to tech and machinery.
Duisburg
Germany’s steel capital and Europe’s largest inland port.
Leipzig
An automotive and logistics powerhouse in Saxony.
Bremen
Aerospace, shipbuilding and steel on the Weser.
Chemnitz
Germany’s machine-tool and mechanical-engineering city.
Wolfsburg
Germany’s automotive capital — the home of Volkswagen.
Mannheim
Engines, turbines and heavy engineering on the Rhine-Neckar.
All of Germany
Back to our full Germany coverage overview.
Explore More Resources
Our Hannover support connects to a wider set of Okuma repair resources — here’s where to go next:
All Repair Services
Every Okuma repair and maintenance service we offer.
OSP Controls
Every control generation we diagnose and repair.
Spare Parts
Tested new and used Okuma electronics, ready to ship.
Automation & Robotics
Support for ARMROID, robot loaders and pallet systems.
Components & Parts
The full list of parts and assemblies we work on.
Germany Coverage
Back to our full Okuma repair overview for Germany.
Frequently Asked Questions
Fast — as our home market, there’s no international freight to plan around, so we reach you on-site quickly or turn a component around at our Birnbach bench.
Yes — we diagnose by what the machine actually does, so a heavy machine-building fault and a precision component fault each get the right approach rather than one assumed pattern.
Just the specific faulty component in almost every case. We’ll confirm what’s needed and how to remove it safely, or come to the machine.
None — 230V/400V at 50Hz is the German standard our repaired components are built and tested against from the start.
Your machine’s model, the OSP control generation, any alarm codes shown, and a short description of the fault.
Have an Okuma Machine Down in Hannover?
Tell us the model, control generation and what’s happening — this is our home market, so we’ll get to you fast.
